Multiscale modelling of soft lattice metamaterials: Micromechanical nonlinear buckling analysis, experimental verification, and macroscale constitutive behaviour

• Published in: International journal of mechanical sciences 2020-12, Vol.188, p.105956, Article 105956
• Main Authors: Jamshidian, M., Boddeti, N., Rosen, D.W., Weeger, O.
• Format: Article
• Language: English
• Subjects: Hyperelastic constitutive model; Lattice structures; Micromechanics; Multiscale modelling; Nonlinear buckling analysis
• ISSN: 0020-7403; 1879-2162
• DOI: 10.1016/j.ijmecsci.2020.105956

•Nonlinear buckling analysis for large deformation of soft lattice metamaterials.•Experimental validation and determination of a global imperfection parameter.•Observation of stretch, bending and buckling dominated behaviours in soft lattices.•Characterizing the effective behaviour of various soft lattice unit cells under PBC.•Evaluating uniaxial constitutive behaviour of soft lattices with a hyperfoam model. Soft lattice structures and beam-metamaterials made of hyperelastic, rubbery materials undergo large elastic deformations and exhibit structural instabilities in the form of micro-buckling of struts under both compression and tension. In this work, the large-deformation nonlinear elastic behaviour of beam-lattice metamaterials is investigated by micromechanical nonlinear buckling analysis. The micromechanical 3D beam finite element model uses a primary linear buckling analysis to incorporate the effect of geometric imperfections into a subsequent nonlinear post-buckling analysis. The micromechanical computational model is validated against tensile and compressive experiments on a 3D-printed sample lattice structure manufactured via multi-material jetting. For the development and calibration of macroscale continuum constitutive models for nonlinear elastic deformation of soft lattice structures at finite strains, virtual characterization tests are conducted to quantify the effective nonlinear response of representative unit cells under periodic boundary conditions. These standard tests, commonly used for hyperelastic material characterization, include uniaxial, biaxial, planar and volumetric tension and compression, as well as simple shear. It is observed that besides the well-known stretch- and bending-dominated behaviour of cellular structures, some lattice types are dominated by buckling and post-buckling response. For multiscale simulation based on nonlinear homogenization, the uniaxial standard test results are used to derive parametric hyperelastic constitutive relations for the effective constitutive behaviour of representative unit cells in terms of lattice aspect ratio. Finally, a comparative study for compressive deformation of a sample sandwich lattice structure simulated by both full-scale beam and continuum finite element models shows the feasibility and computational efficiency of the effective continuum model. [Display omitted]