Prediction of residual stresses and distortions due to laser beam welding of butt joints in pressure vessels

• Published in: The International journal of pressure vessels and piping 2009-02, Vol.86 (2), p.133-142
• Main Authors: Moraitis, G.A., Labeas, G.N.
• Format: Article
• Language: English
• Subjects: Applied sciences; Butt joint; Exact sciences and technology; Keyhole; Laser beam welding; LBW; Mechanical engineering. Machine design; Steel design; Steel tanks and pressure vessels; boiler manufacturing; Welding simulation
• ISSN: 0308-0161; 1879-3541
• DOI: 10.1016/j.ijpvp.2008.11.004

A two-level three-dimensional Finite Element (FE) model has been developed to predict keyhole formation and thermo-mechanical response during Laser Beam Welding (LBW) of steel and aluminium pressure vessel or pipe butt-joints. A very detailed and localized (level-1) non-linear three-dimensional transient thermal model is initially developed, which simulates the mechanisms of keyhole formation, calculates the temperature distribution in the local weld area and predicts the keyhole size and shape. Subsequently, using a laser beam heat source model based on keyhole assumptions, a global (level-2) thermo-mechanical analysis of the LBW butt-joint is performed, from which the joint residual stresses and distortions are calculated. All the major physical phenomena associated to LBW, such as laser heat input via radiation, heat losses through convection and radiation, as well as latent heat are accounted for in the numerical model. Material properties and particularly enthalpy, which is very important due to significant material phase changes, are introduced as temperature-dependent functions. The main advantages of the developed model are its efficiency, flexibility and applicability to a wide range of LBW problems (e.g. welding for pressure vessel or pipework construction, welding of automotive, marine or aircraft components, etc). The model efficiency arises from the two-scale approach applied. Minimal or no experimental data are required for the keyhole size and shape computation by the level-1 model, while the thermo-mechanical response calculation by the level-2 model requires only process and material data. Therefore, it becomes possible to efficiently apply the developed simulation model to different material types and varying welding parameters (i.e. welding speed, heat source power, joint geometry, etc.) in order to control residual stresses and distortions within the welded structure.