Current-induced solder evolution and mechanical property of Sn-3.0Ag-0.5Cu solder joints under thermal shock condition

• Published in: Journal of alloys and compounds 2024-01, Vol.970, p.172519, Article 172519
• Main Authors: Li, Shengli, Hang, Chunjin, Zhang, Wei, Guan, Qilong, Tang, Xiaojiu, Yu, Dan, Ding, Ying, Wang, Xiuli
• Format: Article
• Language: English
• Subjects: Cryogenic temperature; Electromigration; SAC305; Shear strength; Twins
• ISSN: 0925-8388; 1873-4669
• DOI: 10.1016/j.jallcom.2023.172519

Solder joint reliability suffers great challenges due to high current density and miniature solder bump diameter of electronic packages at cryogenic temperature. To tackle these issues, the solder microstructure evolution and the corresponding failure mechanism should be emphasized. In this study, the current-induced microstructure characteristics and mechanical behavior of Sn-3.0Ag-0.5Cu (SAC305) solder joints during thermal shock process was thoroughly addressed over cycles by combining diffusional, electrical, thermal and mechanical features. This result verified that the combining method of thermal shock and electromigration (EM) contributed to the atom diffusion and high thermal stress formation, further causing intermetallic compound (IMC) growth, the repaid dissolution of Cu pad and high thermal stress of the solder joints. High stress induced by either the thermal expansion mismatch of different component, large temperature change (ΔT =346 ℃) and severe lattice distortion became the direct reason for twins and cracks formation of SAC305 solder joints. The combination of crack propagated along the interface and the quick dissolution of Cu substrate at the corner accelerated the eventually failure of the solder joints. Moreover, as the thermal chock cycles was extended, the initiation and propagation of cracks at the cathode side weaken the cathodic shear strength. High stress-induced twin formation at the interface effectively moderated the shear strength degradation due to anode IMC growth after 9 cycles. This study contributed to thoroughly grasp the failure mechanism of the solder joints and design the twin-strengthened Sn-based solder joints under the coupling effects of extreme temperature variation and current stressing. •The solder evolution and shear property of the energized Sn-3Ag-0.5Cu solder joints were studied under thermal shocking.•The crack formation and twin activation were found.•Cracks initiated and propagated at the interface degraded the shear strength of the solder joints.•The twin activation in the internal solder could effectively improve the mechanical property.