Development of the Knudsen effusion methodology for vapour pressure measurements of low volatile liquids and solids based on a quartz crystal microbalance

• Published in: The Journal of chemical thermodynamics 2018-11, Vol.126, p.171-186
• Main Authors: Santos, Luís M.N.B.F., Ferreira, Ana I.M.C. Lobo, Štejfa, Vojtech, Rodrigues, Ana S.M.C., Rocha, Marisa A.A., Torres, Manuel C., Tavares, Fernando M.S., Carpinteiro, Francisco S.
• Format: Article
• Language: English
• Subjects: Effusion; Ionic liquids; Knudsen; Methodology; Quartz crystal microbalance; Sublimation; Vaporisation; Vapour pressures
• ISSN: 0021-9614; 1096-3626
• DOI: 10.1016/j.jct.2018.07.004

[Display omitted] •Description of Knudsen effusion methodology for Vapor Pressures Measurements of Low Volatile liquids and Solids.•Accurate measurement of vapor pressure of ionic liquids.•Implementation of a Quartz crystal microbalance (QCM) in the mass loss detection. The principle of operation, concepts and recent developments of the Knudsen effusion methodology for the vapour pressure measurement of ionic liquids and other low volatile liquids and solids are presented. A new version of a Knudsen effusion apparatus, coupled with a quartz crystal microbalance, which is used for a reliable measurement of the mass flow from a Knudsen effusion cell, is described in detail. In the new system, designed and optimized for the vapour pressure measurement of ionic liquids, it is possible to measure the vapour pressure of small samples using very short effusion time over a wide temperature range. This apparatus allows the vapour pressure measurements using step-temperature and continuous-temperature modes that have the advantage of reducing the measurement time interval and minimize the effect of a sample degradation. A significant number of improvements on the performance and capability for the vapour pressure measurements of ionic liquids has been implemented: in situ temperature control of the vacuum chamber for a better stability of background signal; a new design of a stainless steel effusion cell to decrease the reactivity and sample decomposition; dual temperature control ensuring a positive temperature gradient between bottom and top of the cell in order to avoid the ionic liquids condensation on the effusion cell lid and significantly improved stability of the time frequency derivative at high temperatures; Installation and test of a mass flow tube, on the top of the outlet of the cell lid oven block in order to increase the mass sensitivity coefficient of QCM. The tests and benchmarking concerning the measurement of vapour pressures of ionic liquids performed with [C2mim][NTf2] indicate that the described Knudsen effusion apparatus and methodology is able to produce reproducible and reliable experimental vapour pressure data with an accuracy and quality similar than the achieved in the measurements with low volatile solids. The effect of the improvements on the performance of the Knudsen effusion apparatus was tested and evaluated by the comparison of the vapour pressure results of 1,3,5-triphenylbenzene and 1-ethyl-3-methylimidazolium with the available