Diesel particulate filter (DPF) regeneration using non-thermal plasma induced by dielectric barrier discharge

• Published in: Journal of the Energy Institute 2018-10, Vol.91 (5), p.655-667
• Main Authors: Pu, Xiaoyu, Cai, Yixi, Shi, Yunxi, Wang, Jing, Gu, Linbo, Tian, Jing, Li, Weijun
• Format: Article
• Language: English
• Subjects: Apparent activation energy; Carbon deposition; Diesel particulate filter; Non-thermal plasma; Regeneration
• ISSN: 1743-9671
• DOI: 10.1016/j.joei.2017.06.004

Based on indirect non-thermal plasma (NTP) technology, an experimental study of diesel particulate filter (DPF) regeneration was implemented by a dielectric barrier discharge (DBD) reactor with different O2 flow rate strategies. Carbon deposition characteristics and parameters of the NTP injection system were discussed to facilitate further data analysis and calculation. DPF regeneration was then investigated by comparison analysis of deposit removal mass and backpressure variation. The physicochemical properties of deposit before and after NTP treatment were studied by thermogravimetric analysis (TGA). The results revealed that O3 concentration decreased with the increase of O2 flow rate, and the total output of O3 presented a completely inverse trend when the O2 flow rate was less than 10 L/min. Deposit removal mass and backpressure drop peaked at an O2 flow rate of 10 L/min. Higher O3 output contributed to a better regeneration effect at a higher O2 flow rate. The soluble organic fraction (SOF) in the deposit obviously reduced after DPF regeneration. NTP treatment enhanced the oxidative activity of particulate matter (PM) both in SOF and dry soot (DS), which could accelerate the PM oxidation later. The results demonstrated effective DPF regeneration using a DBD-type NTP reactor with oxygen source, and the favorable PM oxidation effect was obtained after NTP treatment. •DPF offline regeneration was implemented via non-thermal plasma injection.•O2 flow rate greatly influenced the correlative parameters of NTP injection system.•DPF backpressure dropped most by 88% after regeneration at 10 L/min O2 flow rate.•NTP treatment enhanced the oxidative activity of PM both in SOF and DS.