A 1.5–2.8 GHz current-mode LNTA achieving >25 dBm IIP3 and +8 dBm P-1dB gain compression

To meet the requirements of future SAW-less frequency-division duplexing (FDD) and phased-array receivers, the linearity of the Low-Noise Transconductance-Amplifier (LNTA) should be considerably improved. In this paper, a highly-linear common-gate (CG) amplifier is presented that can be directly con...

Full description

Saved in:
Bibliographic Details
Published in:Microelectronics 2019-04, Vol.86, p.57-64
Main Authors: Kargaran, Ehsan, Manstretta, Danilo, Castello, Rinaldo
Format: Article
Language:English
Subjects:
High linearity
LNTA
Noise match
Recirculation
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:To meet the requirements of future SAW-less frequency-division duplexing (FDD) and phased-array receivers, the linearity of the Low-Noise Transconductance-Amplifier (LNTA) should be considerably improved. In this paper, a highly-linear common-gate (CG) amplifier is presented that can be directly connected to the antenna. The LNTA operates in current-mode and is not power-matched to the antenna. In this way, noise and distortion of the active devices are strongly suppressed. Optimum LNTA driving impedance is provided by a transformer-based LC resonant network, while the LNTA core consists of a complementary cross-coupled CG stage to save power. The impact of passive losses is minimized using the noise-matching technique. Furthermore, the effect of source impedance variation on IIP3, NF and gain is also investigated. The measured IIP3 of the LNTA is more than 25 dBm from 1.5 to 2.8 GHz. The P-1dB gain compression is also +8 dBm. The chip is implemented in 28 nm CMOS and has an active area of 0.29 mm2 and draws only 8 mA from a 1.8 V supply.
ISSN:1879-2391
1879-2391
DOI:10.1016/j.mejo.2019.02.012