A physically based elasto-viscoplastic constitutive model for modeling the hot deformation and microstructure evolution of a near α Ti alloy

• Published in: Materials science & engineering. A, Structural materials : properties, microstructure and processing Structural materials : properties, microstructure and processing, 2023-05, Vol.872, p.144994, Article 144994
• Main Authors: Zhang, Haiming, Mao, Xuanyao, Xu, Shuai, Xiao, Namin, Zhang, Ning, Cui, Zhenshan
• Format: Article
• Language: English
• Subjects: Constitutive model; Dynamic recrystallization; Hot forming; Near α titanium alloy
• ISSN: 0921-5093; 1873-4936
• DOI: 10.1016/j.msea.2023.144994

In this work, a general elasto-viscoplastic constitutive model incorporating a finite strain viscoplastic flow law, the Kocks-Mecking dislocation density evolution, work hardening, stress softening due to dynamic recovery and dynamic recrystallization (DRX), and the Johnson-Mehl-Avarmi-Kolmogorov (JMAK) DRX kinetics was established for modeling the deformation and microstructure evolution of a near-α Ti alloy. A full-implicit stress integration scheme was proposed to implement the constitutive model into the commercial FEM solver ABAQUS/Standard. Isothermal hot compression experiments under various deformation conditions and detailed microstructure characterizations were conducted to study the deformation and DRX behaviors of the alloy, as well as to validate the developed material model. The alloy exhibits a typical discontinuous DRX behavior, macroscopically sensitive to various deformation conditions and microscopically strongly affected by the orientation of prior grains. The simulation results regarding the macroscopic flow stress curves and the local volume fractions of DRX in various regions in the specimen agree well with the experimental results. The proposed material model and the robust numerical implemental scheme can be extended to consider more physical deformation mechanisms and microstructure evolution of advanced structural metals and alloys.