Temperature-dependent dielectric and electromechanical properties of co-modified calcium bismuth titanate (CaBi4Ti4O15) ceramics

• Published in: Materialia 2024-08, Vol.36, p.102133, Article 102133
• Main Authors: Mitharwal, Chhavi, Bagla, Anshika, Kolte, Jayant, Mitra, Supratim
• Format: Article
• Language: English
• Subjects: BLSFs; CaBi4Ti4O15; Dielectric properties; Electromechanical properties; High Tc material
• ISSN: 2589-1529; 2589-1529
• DOI: 10.1016/j.mtla.2024.102133

Bismuth layer-structured ferroelectrics (BLSFs), Aurivillius-type ceramics, are of great interest primarily due to their exceptionally high Curie temperature (Tc), rendering them invaluable in various applications such as sensors, actuators, transducers, and micro-electro-mechanical systems designed for elevated temperature operations, including ferroelectric Random-Access Memory applications. This study delves into the dielectric and electromechanical properties of Cobalt-modified Calcium Bismuth Titanate (CaBi4Ti4O15, CBT) (CBT-xCo, with x = 2, 4, and 6 mol%) prepared using a conventional solid-state route followed by sintering. By incorporation of Co, insignificant structural changes were observed, disclosed by X-ray Diffraction analysis. Scanning Electron Microscope micrographs unveiled highly anisotropic grains. The sintered density measured by Archimedes method was maximum for x = 6 mol% with value of 99.1 %. A temperature-dependent dielectric study disclosed that the Curie temperature of the CBT ceramics improved with the increase in Co concentration. Notably, CBT-4Co exhibited the lowest dielectric loss of 0.0967 at 1 MHz and the highest resistivity value of 0.1975 × 105 (Ω cm) at a temperature of 775 °C. Moreover, the electromechanical coupling (kp) and mechanical quality factor (Qm) measured at elevated temperatures unveiled distinctive properties, asserting the potential of the ceramics for high-temperature piezoelectric applications up to 450 °C. CBT-4Co demonstrated the highest kp, with a negligible variation at high temperature, although Qm declined. Results confirmed that CBT-4Co stands distinguished showcasing high Tc, minimal dielectric loss, and consistent electromechanical properties making it the prime candidate for electromechanical applications spanning the gamut from room temperature to elevated temperatures. [Display omitted]