Adsorption and reaction layers when turning AISI 304 using various cooling strategies

This paper deals with the surface chemistry of face-turned workpieces of AISI 304 using various cooling conditions. The workpieces were machined by means of LN2 cooling, CO2 snow cooling, conventional emulsion, sub-zero MWF as well as dry machining. With regard to the machining process, the tool tem...

Full description

Saved in:
Bibliographic Details
Published in:Procedia CIRP 2020, Vol.87, p.125-130
Main Authors: Basten, Stephan, Kirsch, Benjamin, Merz, Rolf, Kopnarski, Michael, Hasse, Hans, C. Aurich, Jan
Format: Article
Language:English
Subjects:
cryogenic turning
stainless steel
surface analysis
surface integrity
turning
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:This paper deals with the surface chemistry of face-turned workpieces of AISI 304 using various cooling conditions. The workpieces were machined by means of LN2 cooling, CO2 snow cooling, conventional emulsion, sub-zero MWF as well as dry machining. With regard to the machining process, the tool temperature, the process forces, and the surface topography are investigated. The surface chemistry is studied using X-ray photoelectron spectroscopy (XPS). These investigations focus firstly on a detection of the elements occurring on the surface, their concentration and the dominant binding state of the main components. Especially the oxidation state of the surface due to the thermal load in the tool-work interface during machining is analyzed on the basis of O 1s and Fe 2p3 core level photoelectron spectra. Secondly, sputter depth profiling using XPS is performed in order to qualitatively analyze the surface depth distribution of the detected elements. Adsorption and reaction layers can occur during turning of AISI 304 up to a depth of approximately 7 nm depending on the cooling conditions used. The use of emulsion, CO2 snow and dry machining results in a slightly higher carbon concentration. Regarding the oxidation in the reaction layer it can be concluded, that the higher the temperatures in the tool at distance of 1 mm to the contact zone during machining, the more oxidation occurs in these layers.
ISSN:2212-8271
2212-8271
DOI:10.1016/j.procir.2020.02.100