Computed tomography imaging analysis of a fused filament fabrication (FFF) 3D printed neck-thyroid phantom for multidisciplinary purposes

The application of the 3D printing technique for the development of low-cost phantoms is being investigated recently and requires a complex study of the interaction of printed materials with different types and qualities of radiation, as well as the characterization of printing filaments to correctl...

Full description

Saved in:
Bibliographic Details
Published in:Radiation physics and chemistry (Oxford, England : 1993) England : 1993), 2024-11, Vol.224, p.112103, Article 112103
Main Authors: Villani, D., Savi, M., Rodrigues, O., Potiens, M.P.A., Campos, L.L.
Format: Article
Language:English
Subjects:
3D printing
FFF
Neck-thyroid
Phantom design
Citations: Items that this one cites
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The application of the 3D printing technique for the development of low-cost phantoms is being investigated recently and requires a complex study of the interaction of printed materials with different types and qualities of radiation, as well as the characterization of printing filaments to correctly simulate human tissue attenuation. This study aims to present the Computed Tomography (CT) Imaging analysis of a fused filament fabrication (FFF) 3D printed anthropomorphic neck-thyroid phantom. The commercial phantom ATOM MAX 711 from CIRS was used as anatomy of reference for the 3D modeling base of the neck-thyroid phantom. Commercially available PLA and ABS XCT-A validated at IPEN were used in the 3D printing process in order to simulate soft and bone tissues respectively. The printing process was done using the RAISE3D PRO 2 FFF printer from IPEN. The imaging study of the phantom was performed through the analysis of images from a CT acquisition, comparing the Hounsfield Units (HU) numbers of the tissues between both CIRS and 3D printed phantoms. The developed phantom is a feasible alternative and presents some desirable characteristics for applications in radiation protection, measurements of radioisotopes incorporated in the thyroid (both contamination counters and nuclear medicine detectors) and training of techniques of acquisition of images with X rays. •3D printing of a neck-thyroid phantom.•FFF plastic filaments used to mimic CIRS phantom's HU numbers.•Complete CT imaging comparison between commercial and 3D printed phantom.•Caveats on 3D printing the phantom.
ISSN:0969-806X
DOI:10.1016/j.radphyschem.2024.112103