Application of quorum sensing inhibitors for improving anti-biofouling of polyamide reverse osmosis membranes: Direct injection versus surface modification

• Published in: Separation and purification technology 2021-01, Vol.255, p.117736, Article 117736
• Main Authors: Kim, Jaehyeok, Shin, MinGyu, Song, WonJung, Park, SangHee, Ryu, Junhee, Jung, Jaehyun, Choi, SuYoung, Yu, Youngjae, Kweon, Jihyang, Lee, Jung-Hyun
• Format: Article
• Language: English
• Subjects: Biofouling reduction; Quorum sensing inhibition; Surface modification; Vanillin; Vanillin analogue
• ISSN: 1383-5866; 1873-3794
• DOI: 10.1016/j.seppur.2020.117736

[Display omitted] •Biofilm in reverse osmosis membrane regulated by quorum sensing was investigated.•Surface modification versus direct dosing of quorum sensing inhibitors was compared.•Membrane surface modification with QSIs shows higher inhibitory effects on biofilm.•Chemical structure of vanillin and vanillin-analogues are crucial on QS inhibition. Quorum sensing inhibitors (QSIs) have shown promising results in reducing biofouling in various membrane systems. Vanillin was shown to inhibit QS of gram-negative bacteria during water treatment. Here, four vanillin-analogues with various chemical structures were used to understand the QS mechanisms in biofilm reduction and to compare direct dosing and surface modification of the inhibitors. Biofilm reduction, evaluated based on the content of extracellular polymeric substances (EPS), was the greatest with vanillin (49%) and occurred to some extent with 4-hydroxybenzaldehyde (21%) and m-anisaldehyde (13%), when direct dosing was applied. Experiments using vanillin-analogues revealed crucial roles of the chemical structure and functional groups on the inhibition of biofilm formation. The aldehyde and hydroxyl groups in both vanillin and 4-hydroxybenzaldehyde might be essential for QS inhibition. Further, surface modification with interfacial polymerization and immobilization of QSIs was conducted to evaluate their anti-biofouling capabilities. Surface modification was markedly effective in reducing biofilm formation; the EPS content of biofilms formed on vanillin-incorporated membranes was reduced by 64%. Additionally, the modified membranes showed a water flux comparable to that of pristine membranes, showing little possibility to block membrane pores during modification procedures. These findings will aid the development of QSI-based techniques for biofouling mitigation.