Synthesis and Characterization of Radical-Bearing Polyethers as an Electrode-Active Material for Organic Secondary Batteries

• Published in: Macromolecules 2008-09, Vol.41 (18), p.6646-6652
• Main Authors: Oyaizu, Kenichi, Suga, Takeo, Yoshimura, Kentaro, Nishide, Hiroyuki
• Format: Article
• Language: English
• Subjects: Applied sciences; Direct energy conversion and energy accumulation; Electrical engineering. Electrical power engineering; Electrical power engineering; Electrochemical conversion: primary and secondary batteries, fuel cells; Exact sciences and technology; Organic polymers; Physicochemistry of polymers; Polymers with particular properties; Preparation, kinetics, thermodynamics, mechanism and catalysts
• ISSN: 0024-9297; 1520-5835
• DOI: 10.1021/ma702576z

In search of polymer backbones to bind organic radical pendant groups as redox centers for high-density charge storage application, polyether was employed as a flexible chain with a low glass transition temperature and affinity to electrolyte solutions. Cyclic ethers bearing nitroxide radicals were synthesized and polymerized via ring-opening polymerization utilizing various initiators. Polyethers bearing robust radical substituents such as 2,2,6,6-tetramethylpiperidin-1-oxyl-4-yl and 2,2,5,5-tetramethyl-2,5-dihydro-1H-pyrrol-1-oxyl-3-yl groups with high density, i.e., per repeating unit with small equivalent weights, were prepared by the anionic polymerization of the corresponding epoxides. Cyclic voltammetry of the radical polyethers, obtained for polymer/carbon composites confined at an aluminum current collector, revealed large redox capacities comparable to the formula weight-based theoretical values, which was ascribed to the efficient swelling and yet insoluble properties of the polyethers in electrolyte solutions by virtue of their high molecular weights and adhesive properties to be held on electrode surfaces. The redox capacity also indicated that the ionophoric polyether matrix accommodated electrolyte anions to compensate positive charges produced by the oxidation of the neutral radicals at the polymer/electrode interface, allowing charge propagation deep into the polymer layer by a site-hopping mechanism. Test cells fabricated with the polymer/carbon composite as the cathode and a Li anode, sandwiching an electrolyte layer, performed as a secondary battery at output voltages near 3.6 V without substantial degradation even after 100 charging−discharging cycles.