The growth and nanothermite reaction of 2Al/3NiO multilayer thin films

• Published in: Journal of applied physics 2022-07, Vol.132 (3)
• Main Authors: Abere, Michael J., Beason, Matthew T., Reeves, Robert V., Rodriguez, Mark A., Kotula, Paul G., Sobczak, Catherine E., Son, Steven F., Yarrington, Cole D., Adams, David P.
• Format: Article
• Language: English
• Subjects: Applied physics; Bilayers; Dissolution; Heat sources; Heating rate; High temperature; Ignition; Laser beam heating; Multilayers; Nickel aluminides; Nickel oxides; Powder compacts; Propagation velocity; Self propagation; Stoichiometry; Thickness; Thin films
• ISSN: 0021-8979; 1089-7550
• DOI: 10.1063/5.0096787

Nanothermite NiO–Al is a promising material system for low gas emission heat sources; yet, its reactive properties are highly dependent on material processing conditions. In the current study, sputter deposition is used to fabricate highly controlled nanolaminates comprised of alternating NiO and Al layers. Films having an overall stoichiometry of 2Al to 3NiO were produced with different bilayer thicknesses to investigate how ignition and self-sustained, high temperature reactions vary with changes to nanometer-scale periodicity and preheat conditions. Ignition studies were carried out with both hot plate and laser irradiation and compared to slow heating studies in hot-stage x-ray diffraction. Ignition behavior has bilayer thickness and heating rate dependencies. The 2Al/3NiO with λ ≤ 300 nm ignited via solid/solid diffusion mixing (activation energy, Ea = 49 ± 3 kJ/mole). Multilayers having λ ≥ 500 nm required a more favorable mixing kinetics of solid/liquid dissolution into molten Al (Ea = 30 ± 4 kJ/mole). This solid/liquid dissolution Ea is a factor of 5 lower than that of the previously reported powder compacts due to the elimination of a passivating Al oxide layer present on the powder. The reactant mixing mechanism between 300 and 500 nm bilayer thicknesses was dependent on the ignition source's heating rate. The self-propagating reaction velocities of 2Al/3NiO multilayers varied from 0.4 to 2.5 m/s. Pre-heating nanolaminates to temperatures below the onset reaction temperatures associated with forming intermediate nickel aluminides at multilayer interfaces led to increased propagation velocities, whereas pre-heating samples above the onset temperatures inhibited subsequent attempts at laser ignition.