Loading…
A Model Reduction Procedure for the Dynamic Analysis of Rail Vehicles Subjected to Linear Creep Forces
The set of differential equations governing the motion of an unrestrained coned wheelset travelling on a tangent section of track and acted upon by creep forces arising from the contact between wheel and rail are, in the terminology of numerical analysis, extremely "stiff". This stiffness...
Saved in:
Published in: | Vehicle system dynamics 1996-05, Vol.25 (5), p.349-367 |
---|---|
Main Authors: | , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | The set of differential equations governing the motion of an unrestrained coned wheelset travelling on a tangent section of track and acted upon by creep forces arising from the contact between wheel and rail are, in the terminology of numerical analysis, extremely "stiff". This stiffness can be attributed to the existence of two negative real eigenvalues in the solution of the eigenproblem associated with the linearized equations of motion. Compared with the two complex conjugate eigenvalues that complete this solution, the real eigenvalues have large magnitudes and necessitate that relatively. small timesteps be used in order to obtain an accurate numerical integration of the full set of equations of motion. However, by truncating the set of left and right eigenvectors to eliminate these real eigenvalues in a modal analysis of the wheelset, it was found that their contribution to the overall dynamic response is negligible. This same modal truncation approach was then applied to the sub-structured equations of motion for a simple rail vehicle system consisting of two wheelsets connected to a main body by linear springs and dampers. Essentially, the physical degrees of freedom for each wheelset substructure were replaced by a single complex coordinate obtained from the previous normal modes analysis. Using this model reduction procedure, accurate numerical results for the motion of the rail vehicle were generated several times faster than the results obtained by numerically integrating the full set of differential equations directly. |
---|---|
ISSN: | 0042-3114 1744-5159 |
DOI: | 10.1080/00423119608968971 |