Use of a novel dual-sensor probe array and electrical resistance tomography for characterization of the mean and time-dependent properties of inclined, bubbly oil-in-water pipe flows

• Published in: Measurement science & technology 2011-10, Vol.22 (10), p.104012-1-11
• Main Authors: Zhao, X, Lucas, G P
• Format: Article
• Language: English
• Subjects: Arrays; Data processing; High speed; Pipe; Pipe flow; Volume fraction; Wave propagation; Wavelengths
• ISSN: 0957-0233; 1361-6501
• DOI: 10.1088/0957-0233/22/10/104012

An array of dual-sensor conductance probes, which contains a number of dual-sensor probes equispaced across the diameter of an 80 mm pipe, is introduced in this paper for characterizing bubbly oil-in-water pipe flows inclined at angles from 15 degree to 60 degree to the vertical. Each dual-sensor probe measures the local axial oil velocity and the local oil volume fraction at the position of the probe. Choosing an averaging interval of 0.05 s, values of the local oil volume fraction and the local oil velocity were measured simultaneously at the different probe positions, enabling the time-dependent structure of the two-phase flow to be investigated. After data processing, time-dependent variations of volume fraction along the pipe were found which are consistent with the presence of intermittent Kelvin-Helmholtz wave structures in the flow. A high-speed dual-plane ERT system was used to measure the axial propagation speed of these Kelvin-Helmholtz waves, using cross correlation. This paper presents results for the measured characteristics of inclined oil-in-water flows including (i) time-averaged and time-dependent oil volume fraction and velocity distributions and (ii) the Kelvin-Helmholtz wave properties including the wave speed, wave amplitude, wavelength and wave frequency.