Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography

• Published in: Journal of micromechanics and microengineering 2008-12, Vol.18 (12), p.125014-125014 (9)
• Main Authors: Stampfl, J, Baudis, S, Heller, C, Liska, R, Neumeister, A, Kling, R, Ostendorf, A, Spitzbart, M
• Format: Article
• Language: English
• Subjects: Applied sciences; Exact sciences and technology; Machinery and processing; Plastics; Polymer industry, paints, wood; Technology of polymers
• ISSN: 0960-1317; 1361-6439
• DOI: 10.1088/0960-1317/18/12/125014

Stereolithography (SLA) is a widely used technique for the fabrication of prototypes and small series products. The main advantage of SLA and related solid freeform fabrication (SFF) techniques is their capability to fabricate parts with complex shapes with high resolution. Although the spectrum of available materials has been widened in recent years, there is still a lack of materials which can be processed with SLA on a routine basis. In this work, a micro-SLA (muSLA) system is presented which can shape a number of different photopolymers with resolutions down to 5 mum in the xy-plane and 10 mum in the z-direction. The system is capable of processing various specifically tailored photopolymers which are based on acrylate chemistry. The materials processed for this work range from hybrid sol -gel materials (ORMOCER) to photo-crosslinked elastomers and hydrogels. The elastic moduli of these materials can be tuned over several orders of magnitude and range from 0.1 MPa to 8000 MPa. The reactivity of these monomers is sufficient for achieving writing speeds up to 500 mm s-1 which is comparable to commercial SLA resins. Various test structures are presented which show the suitability of the process for fabricating parts required for applications in micro-mechanical systems as well as for applications in biomedical engineering. Using the presented system, internal channels with a diameter of 50 mum and a length of 1500 mum could be fabricated. It was also possible to manufacture a micro-mechanical system consisting of a fixed axe and a free spinning turbine wheel.