A high-pressure plug flow reactor for combustion chemistry investigations

• Published in: Measurement science & technology 2017-10, Vol.28 (10), p.105902
• Main Authors: Lu, Zhewen, Cochet, Julien, Leplat, Nicolas, Yang, Yi, Brear, Michael J
• Format: Article
• Language: English
• Subjects: chemical kinetics; fuel chemistry; low temperature combustion; plug flow reactor
• ISSN: 0957-0233; 1361-6501
• DOI: 10.1088/1361-6501/aa8023

A plug flow reactor (PFR) is built for investigating the oxidation chemistry of fuels at up to 50 bar and 1000 K. These conditions include those corresponding to the low temperature combustion (i.e. the autoignition) that commonly occurs in internal combustion engines. Turbulent flow that approximates ideal, plug flow conditions is established in a quartz tube reactor. The reacting mixture is highly diluted by excess air to reduce the reaction rates for kinetic investigations. A novel mixer design is used to achieve fast mixing of the preheated air and fuel vapour at the reactor entrance, reducing the issue of reaction initialization in kinetic modelling. A water-cooled probe moves along the reactor extracting gases for further analysis. Measurement of the sampled gas temperature uses an extended form of a three-thermocouple method that corrects for radiative heat losses from the thermocouples to the enclosed PFR environment. Investigation of the PFR's operation is first conducted using non-reacting flows, and then with isooctane oxidation at 900 K and 10 bar. Mixing of the non-reacting temperature and species fields is shown to be rapid. The measured fuel consumption and CO formation are then closely reproduced by kinetic modelling using an extensively validated iso-octane mechanism from the literature and the corrected gas temperature. Together, these results demonstrate the PFR's utility for chemical kinetic investigations.