A flow forming process model to predict workpiece properties in AISI 304L

• Published in: IOP conference series. Materials Science and Engineering 2022-12, Vol.1270 (1), p.12093
• Main Authors: Arian, B, Oesterwinter, A, Homberg, W, Vasquez, J R, Walther, F, Kersting, L, Trächtler, A
• Format: Article
• Language: English
• Subjects: Austenitic stainless steels; Closed loops; Finite element method; Martensite; Mathematical models; Phase transitions; Process controls; Process parameters; Reversed flow; Seamless tubes; Workpieces
• ISSN: 1757-8981; 1757-899X
• DOI: 10.1088/1757-899X/1270/1/012093

The control of workpiece properties enables an application-oriented and time-efficient production of components. In reverse flow forming, e.g., the control of the microstructure profile, in contrast to the adjustment of the geometry, is not yet part of the state of the art. This is particularly challenging when forming seamless tubes made of metastable austenitic stainless AISI 304L steel. In this steel, a phase transformation from austenite to martensite can occur due to mechanically and/or thermally induced energy. The α’-martensite has different mechanical and micromagnetic properties, which can be advantageous depending on the application. For the purpose of local property control, the resulting α’-martensite content should be measured and controlled online during the forming process. In this paper, results from an empirical correlation model of process parameter combinations and resulting α’-martensite content as well as geometry will be presented. Based on this, the focus of the paper will be on process modeling by means of FEM in order to create the transition to a numerically supported process model. Furthermore, it will be specified how the numerical process model can be used in a predictive manner for an online closed-loop process control.