Effect of pressing temperature on the mechanical properties of waste styrofoam filled sawdust composite

• Published in: IOP conference series. Materials Science and Engineering 2018-02, Vol.309 (1), p.12034
• Main Authors: Nasution, H, Harahap, H, Riani, R, Pelawi, A I
• Format: Article
• Language: English
• Subjects: Fillers; Impact resistance; Impact strength; Impact tests; Maleic anhydride; Mechanical properties; Morphology; Pressing; Sawdust; Styrofoam; Temperature; Tensile strength; Wood fibers
• ISSN: 1757-8981; 1757-899X
• DOI: 10.1088/1757-899X/309/1/012034

This study has investigated the effect of pressing temperature on mechanical properties of waste styrofoam composite filled with sawdust. The waste styrofoam as the matrix was mixed with sawdust as filler and maleic anhydride (6%wt) as a compatibilizer. The weight fraction ratio between matrix and filler 70:30 (wt) and wood fiber size of 100 mesh were conducted. The pressing temperatures were investigated using a hot press with temperatures varied viz. 120, 130, 150, and 170 °C. Surface modification was applied to sawdust to diminish its polarity so that it could be compatible with the non-polar waste styrofoam matrix. Composites were evaluated using Instron and impact tester machine to investigate the tensile strength and impact strength of the material, respectively. The result indicated that tensile strength has decreased with the increase of pressing temperature where the largest tensile strength is at 130 °C of 33 MPa. The same trend has occurred on impact strength, where the value has reached of 300 J/cm2 on pressing temperature of 130 °C. From scanning electron microscopy (SEM) analysis it is also confirmed that during impact test, the resistance of the composite which has been pressed at the temperature of 130 °C have given better morphology than the composite at 170 °C.