A low-temperature efficient approach for the fabrication of ZnO-rGO heterostructures for applications in optoelectronic applications

• Published in: IEEE access 2023-01, Vol.11, p.1-1
• Main Authors: Narzary, Rewrewa, Chetia, Rajib, Sahu, Partha Pratim
• Format: Article
• Language: English
• Subjects: Carbon; carrier concentration; Carrier density; Chemicals; Electron transport; Energy conversion efficiency; Fabrication; Functional groups; Graphene; Hall effect; Heterostructures; High temperature; II-VI semiconductor materials; Low temperature; mobility; Nanocomposites; Nanostructures; Optical properties; Optoelectronic devices; Oxygen; Photovoltaic cells; Raman spectroscopy; rGOs; Spectrum analysis; Synthesis; Temperature measurement; Transport properties; Vibrations; Zinc oxide; ZnO-rGO
• ISSN: 2169-3536; 2169-3536
• DOI: 10.1109/ACCESS.2023.3300261

In recent years, graphene oxides (GO)/reduced graphene oxide (rGO) and its derivatives have garnered/gained the attention of the scientific and research community due to their superior candidature in various electronic and optoelectronic devices due to their exceptional solution processability, easy fabrication, and tunable electron transport properties. However, the requirement of high temperature processing steps and complicated processes motivate the scientific community to find simple, efficient and low-temperature methods. Here, we report the synthesis of GO/rGOs and ZnO-rGO nanocomposite at a relatively low temperature of 150 °C using a simple and efficient solution-processed methodology. The SEM/EDX, XRD, Raman spectroscopy, FTIR, and UV-vis spectroscopy performed to investigate the morphological, structural and optical properties confirmed the successful synthesis of GO, rGO and ZnO-rGO with an enhanced carbon-carbon (sp2 and sp3) component and reduced oxygen-containing functional group and the restoration of the graphitic domain in the hybrid nanocomposite, attributed to the possible chemical interaction between the rGO and ZnO through oxygen-containing functional groups. The bandgap of ZnO-rGO is modulated from 3.27 eV to 2.72 eV in comparison to pure ZnO. Using Hall measurement the carrier concentration was found to be 3.077 x 1017 cm-3, 4.518 x 1020 cm-3, and 2.973 x 1019 cm-3 for ZnO, rGO and ZnO-rGO, respectively and the mobility was calculated as 16.787 cm2/V.s, 46.112 cm2/V.s and 25.953 cm2/V.s, respectively. The fabricated cell exhibited a power conversion efficiency of 6.17 % (Voc = 0.551 V and Jsc = 24.33 mA/cm2. After 8 weeks, 90 % of the initial efficiency could be achieved, suggesting an excellent stability of the the fabricated devices. The prepared samples have potential applications in different electronics and optoelectronics devices for enhanced performance.