Interferometric measurements of laser-induced shockwaves in air: Variable laser energy

• Published in: The Journal of the Acoustical Society of America 2023-03, Vol.153 (3_supplement), p.A362-A362
• Main Authors: Hart, Carl R., Lyons, Gregory W., White, Michael J.
• Format: Article
• Language: English
• ISSN: 0001-4966; 1520-8524
• DOI: 10.1121/10.0019166

When focused to a small spot size in air, a sufficiently energetic laser pulse initiates a rapidly expanding plasma. After a delay, a shockwave detaches from the plasma boundary and propagates. General features of the shockwaves can be deduced from condenser microphone measurements. However, the minimum range is limited by damage thresholds, and the presence of the microphone introduces a number of measurement artifacts. Distortion of the signal is caused by diffraction around the sensor, and the limited bandwidth does not allow rise times to be correctly quantified. In contrast, optical interferometry is a nonintrusive diagnostic for quantifying shockwave characteristics. In this study, a Nd:YAG laser is focused through a converging lens in order to generate laser-induced shockwaves. By using a variable attenuator, four laser energy outputs are examined: 25, 50, 75, and 100% of the maximum energy transmission. Heterodyne Mach–Zehnder interferometer measurements are made from 10 mm to 200 mm from the focal point of the lens. Virtual velocity signals, proportional to the time derivative of optical phase differences, are used to estimate density and pressure time histories, along with peak pressure as a function of distance.