Structural Damage Features Extracted by Convolutional Neural Networks from Mode Shapes

• Published in: Applied sciences 2020-06, Vol.10 (12), p.4247
• Main Authors: Zhong, Kefeng, Teng, Shuai, Liu, Gen, Chen, Gongfa, Cui, Fangsen
• Format: Article
• Language: English
• Subjects: Accuracy; Analysis; Artificial neural networks; Computer simulation; convolutional neural networks; Curvature; Damage detection; Deformation; feature extraction; Geometric figures; Inspection; mode curvature differences; mode shapes; Neural networks; Order parameters; Structural failures; structural state detection; Technology application; Trusses (Building); Unmanned aerial vehicles
• ISSN: 2076-3417; 2076-3417
• DOI: 10.3390/app10124247

This paper aims to locate damaged rods in a three-dimensional (3D) steel truss and reveals some internal working mechanisms of the convolutional neural network (CNN), which is based on the first-order modal parameters and CNN. The CNN training samples (including a large number of damage scenarios) are created by ABAQUS and PYTHON scripts. The mode shapes and mode curvature differences are taken as the inputs of the CNN training samples, respectively, and the damage locating accuracy of the CNN is investigated. Finally, the features extracted from each convolutional layer of the CNN are checked to reveal some internal working mechanisms of the CNN and explain the specific meanings of some features. The results show that the CNN-based damage detection method using mode shapes as the inputs has a higher locating accuracy for all damage degrees, while the method using mode curvature differences as the inputs has a lower accuracy for the targets with a low damage degree; however, with the increase of the target damage degree, it gradually achieves the same good locating accuracy as mode shapes. The features extracted from each convolutional layer show that the CNN can obtain the difference between the sample to be classified and the average of training samples in shallow layers, and then amplify the difference in the subsequent convolutional layer, which is similar to a power function, finally it produces a distinguishable peak signal at the damage location. Then a damage locating method is derived from the feature extraction of the CNN. All of these results indicate that the CNN using first-order modal parameters not only has a powerful damage location ability, but also opens up a new way to extract damage features from the measurement data.