Effect of Ca on microstructure and high temperature creep properties of AM60-1Ce alloy

• Published in: China foundry 2019-03, Vol.16 (2), p.88-96
• Main Authors: Jin, Wei, Song, Yu-lai, Liu, Yao-hui, Zhao, Ping, Misra, R. D. K.
• Format: Article
• Language: English
• Subjects: Al2Ca hard phase; Alloys; as-cast magnesium alloy; Casting (Metal); Engineering; Grain boundaries; high temperature; Machines; Magnesium alloys; Magnesium castings; Manufacturing; Materials Engineering; Mechanical properties; Metallic Materials; Metals (Materials); Processes; Research & Development; Specialty metals industry
• ISSN: 1672-6421; 2365-9459; 1672-6421
• DOI: 10.1007/s41230-019-8173-z

A series of AM60-1Ce- x Ca ( x =0, 0.5, 1.5, 2.5) magnesium alloys were prepared by gravity casting method and analyzed by means of XRD, DSC and SEM. The effects of Ca on normal temperature mechanical properties and high temperature creep behavior of alloys were characterized by tensile and constant creep test. Microstructure analysis indicated that Ca was preferentially combined with Al in the alloy to form the high melting point Al 2 Ca phase at the grain boundary. The addition of Ca can refine the crystal grains and reduces the content of β-Mg 17 Al 12 phase. With the increase of Ca content in the alloy, Al 2 Ca phases at the grain boundary gradually changed to the network of lamellar structure, and replaced the β-Mg 17 Al 12 phase as the main strengthening phase gradually. The creep resistance of the alloy continuously increases because the high-temperature stable phase Al 2 Ca firmly nailed at grain boundaries impedes the sliding of grain boundaries. However, when the addition of Ca was more than 1.5%, mechanical properties of the alloy started to decrease, which was probably due to the large amount of irregularly shaped Al 2 Ca phases at the grain boundary. Experimental results show that the optimal addition amount of Ca is 1.5wt.%.