Discrete modelling of the mechanical response of Cuxhaven sand under shear and oedometric conditions using the rolling resistance contact model

• Published in: E3S web of conferences 2024, Vol.544, p.7010
• Main Authors: Uday, Anjali, Peña-Olarte, Andrés Alfonso, Wang, Yuting
• Format: Article
• Language: English
• Subjects: calibration; distinct element method; oedometer; rolling resistance linear; simple shear; triaxial
• ISSN: 2267-1242; 2267-1242
• DOI: 10.1051/e3sconf/202454407010

The Distinct element method (DEM) is a promising approach to model the microscopic behaviour of granular materials, but the capability of the simulations to reproduce the mechanical response of real granular materials depends strongly on the contact model parameters utilized. The present study focuses on the calibration and validation of the rolling resistance linear model parameters for Cuxhaven sand based on the experimental results from triaxial and oedometer tests. A sensitivity analysis was conducted to explore the influence of contact model parameters on the sample preparation and the shear stage of triaxial tests. The influence of parameters like rolling resistance friction coefficient, inter-particle friction coefficient, effective modulus, and normal-to-shear stiffness ratio were investigated. For calibration of the DEM model, the input parameters were selected such that the simulations reproduce the macro mechanical characteristics like dilation angle, peak stress, and stiffness. The calibrated parameters were then validated by simulating a one-dimensional compression test. The results are in good agreement with the experiments, which proves the suitability of the calibrated parameters. In addition, the validated parameters were applied to investigate the mechanical behaviour including the evolution of contact force chains, non-coaxiality of principal stress and strain rate, and sample inhomogeneity during a simple shear test.