On the importance of interface stability in cellular automata models: Planar and dendritic solidification in laser melted YSZ

• Published in: Materials & design 2022-07, Vol.219, p.110823, Article 110823
• Main Authors: Ushmaev, Dmitrii, Liao, Zhirong, Notron, Andy, Axinte, Dragos
• Format: Article
• Language: English
• Subjects: Cellular automata; Grain bending; Grain surface sealing; Laser glazing; Planar-dendritic mixed grain growth; TBC
• ISSN: 0264-1275; 1873-4197
• DOI: 10.1016/j.matdes.2022.110823

[Display omitted] •Fluid flow motion significantly affects melt pool boundaries.•Surface grain sealing and surface grain bending phenomena observed.•Planar and dendritic crystal growth implemented via cellular automata approach.•Grain formation of YSZ after laser melting was explained. Laser-processing technologies are often applied to enhance the properties of ceramics, such as laser glazing of Yttria Stabilised Zirconia (YSZ). However, very limited attention was paid to the solidification phenomena and mechanisms of YSZ. In this paper, two coexisting solidification behaviours of laser-melted YSZ have been identified, namely grain bending (crystals with curved grain boundary geometry under the surface) and grain surface sealing (in-plane surficial crystals cover vertical columnar grains). Although these phenomena have been reported, this is the first time the two phenomena coexist in the same material. A new cellular automata (CA) approach has been proposed to explain the formation mechanisms of these two phenomena. This new CA method consists of the separation of growth modes into dendritic and planar growth, whose critical transition value is calculated based on the supercooling theory. Besides, the proposed model for planar growth is far less computationally expensive than the widely used decentred octahedron algorithm. A good agreement with the EBSD data of longitudinal cross-sections and the top surface has been observed which proves that the proposed method can become a more realistic and efficient way to predict the grain microstructure in laser processing, allowing to capture dendritic and planar growth simultaneously.