Use of electric field to enhance collection of ultrafine particles using quartz crystal microbalance

• Published in: Journal of aerosol science 2025-02, Vol.184, Article 106495
• Main Authors: Vichayarom, Nichakran, Jaruwongrungsee, Kata, Intra, Panich, Le, Thi-Cuc, Tsai, Chuen-Jinn, Morris, John, Dejchanchaiwong, Racha, Tekasakul, Perapong
• Format: Article
• Language: English
• Subjects: AT-cut; frequency shift; Nanoparticle; PM0.1; Real-time mass concentration
• ISSN: 0021-8502
• DOI: 10.1016/j.jaerosci.2024.106495

In the present study, a Quartz Crystal Microbalance (QCM) technique was used in conjunction with an electric field to measure particle mass concentration of ultrafine particles (UFPs). Using Sauerbrey's equation, particle mass concentration can be estimated from the QCM frequency change. An electric field enhanced particle collection efficiency on the QCM surface, focusing on particle sizes ranging from 30 to 300 nm in aerodynamic diameter. Polydisperse NaCl was used to investigate the relationship between particle mass concentration and two key parameters - collection efficiency and mass sensitivity. Data were obtained using the Scanning Mobility Particle Sizer (SMPS). Particle concentrations were varied from 23.3 to 522.8 μg/m³ for applied voltages from 0 to 1 kV at 5 L/min flow. The optimal condition was achieved at 1 kV at a concentration of 23.3 μg/m³, where total collection efficiencies were between 90.3 and 99.5%. The mass accumulated on the QCM surface was linear with the frequency shift measured by a QCM detector, yielding the mass sensitivity of 0.177 μg/Hz. Based on the minimum frequency shift and general concentration of atmospheric UFPs, the QCM detector is appropriate for hourly measurement. This was confirmed by a good agreement between the predicted particle mass deposition by the mass sensitivity of the QCM and the measured one with a linear fit (r2 = 0.997). •QCM technique was integrated with an electric field to collect UFPs.•The study demonstrated remarkable particle collection efficiency up to 99.5%.•The frequency shift was linearly correlated to the mass accumulated on QCM.•The predicted particle mass deposition by the mass sensitivity is highly accurate.•The device is capable of 1-h measurement when UFP concentration is > 1.2 μg/m3.