Oxidation behavior of Al-doped Ti3SiC2-20 wt.%Ti5Si3 composite

• Published in: Ceramics international 2021-12, Vol.47 (23), p.33622-33631
• Main Authors: Guedouar, Bendiba, Hadji, Youcef, Benamor, Abdessabour, Chiker, Nabil, Haddad, Adel, Tricoteaux, Arnaud, Erauw, Jean-Pierre, Dupont, Vedi, Hadj-Larbi, Fayçal, Soualili, Mohamed Amine, Hadji, Mohamed
• Format: Article
• Language: English
• Subjects: Al2TiO5 phase; Breakaway oxidation; Engineering Sciences; MAX phases; Oxide scale; SPS sintering
• ISSN: 0272-8842; 1873-3956
• DOI: 10.1016/j.ceramint.2021.08.272

In this work, an aluminum-doped Ti3SiC2-20 wt.% Ti5Si3 composite was prepared through reactive spark plasma sintering (SPS) from a powder mixture of Ti, SiC, C, and Al. The microstructure evolution of the formed oxide scales onto this composite were investigated in the temperature range of 1000–1400 °C in air. Up to 1200 °C, the exposed surfaces were highly protected by a continuous and dense α-Al2O3 layer with a good adherence that acts as a barrier diffusion. Above this temperature, the breakaway oxidation occurs, leading to an oxidation speed-up, which results in a thick oxide scale formation with low oxidation protective capacity. Scanning electron microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), X-Ray Diffraction (XRD), and Raman spectroscopy analysis of the oxide scales at different temperatures revealed that Al2TiO5 grain growth is the main deterioration factor of the protective α-Al2O3 layer. The oxidation kinetics of this composite at 1100 °C is comparable with that of the best MAX phases in terms of oxidation resistance, with a parabolic rate constant (Kp) of 3.08 × 10−10 kg2/m4s.