Physico-chemistry of energy-dense Li1.2Mn0.52Co0.13Ni0.13Al0.02O2 cathode material for lithium-ion batteries obtained from urea and ethylene glycol fuels

• Published in: Materials research express 2019-09, Vol.6 (11)
• Main Authors: Nkosi, Funeka P, Palaniyandy, Nithyadharseni, Raju, Kumar, Billing, Caren, Ozoemena, Kenneth I
• Format: Article
• Language: English
• Subjects: combustion fuels; ethylene glycol; high-energy LMNCA; lithium-ion battery; suppression of voltage decay
• ISSN: 2053-1591
• DOI: 10.1088/2053-1591/ab4302

A lithium manganese rich-transition metal oxide, Li1.2Mn0.52Co0.13Ni0.13Al0.02O2 (LMNCA) cathode was successfully prepared by the combustion method with urea (i.e., LMNCA-urea) and ethylene glycol (EG) (i.e., LMNCA-EG) used as fuels. The effects of the combustion fuels on the physical (XRD, XPS, Raman, FE-SEM and BET) and electrochemical properties of the samples were thoroughly evaluated. Both LMNCA samples exhibit a highly ordered crystalline 'layered-layered' structure. LMNCA-urea delivered a highest specific capacity of 295 mAh g−1 with the capacity retention of 84% after 50 cycles, while the LMNCA-EG gave a specific capacity of 240 mAh g−1 (capacity retention of 78%) after 50 cycles. However, the EG-based combustion synthesis suppresses voltage decay by its ability to prevent the undesirable transformation of the layered-layered phase to the layered-to-spinel phase upon continuous cycling and improves the charge-transfer kinetics of the LMNCA. The results provide a promise that EG-based combustion can be tuned to provide high-performance LMNCA for future application.