Radionuclide identification based on energy-weighted algorithm and machine learning applied to a multi-array plastic scintillator

• Published in: Nuclear engineering and technology 2023, 55(10), , pp.3907-3912
• Main Authors: Lee, Hyun Cheol, Koo, Bon Tack, Jeon, Ju Young, Cheon, Bo-Wi, Yoo, Do Hyeon, Chung, Heejun, Min, Chul Hee
• Format: Article
• Language: English
• Subjects: Convolutional neural network; Energy-weighted algorithm; Gamma spectrum; Multi-arrayed plastic scintillator; Radiation portal monitor; Source identification; 원자력공학
• ISSN: 1738-5733; 2234-358X
• DOI: 10.1016/j.net.2023.07.005

Radiation portal monitors (RPMs) installed at airports and harbors to prevent illicit trafficking of radioactive materials generally use large plastic scintillators. However, their energy resolution is poor and radionuclide identification is nearly unfeasible. In this study, to improve isotope identification, a RPM system based on a multi-array plastic scintillator and convolutional neural network (CNN) was evaluated by measuring the spectra of radioactive sources. A multi-array plastic scintillator comprising an assembly of 14 hexagonal scintillators was fabricated within an area of 50 × 100 cm2. The energy spectra of 137Cs, 60Co, 226Ra, and 4K (KCl) were measured at speeds of 10–30 km/h, respectively, and an energy-weighted algorithm was applied. For the CNN, 700 and 300 spectral images were used as training and testing images, respectively. Compared to the conventional plastic scintillator, the multi-arrayed detector showed a high collection probability of the optical photons generated inside. A Compton maximum peak was observed for four moving radiation sources, and the CNN-based classification results showed that at least 70% was discriminated. Under the speed condition, the spectral fluctuations were higher than those under dwelling condition. However, the machine learning results demonstrated that a considerably high level of nuclide discrimination was possible under source movement conditions.