Effect of Bubbles on Liquid Nitrogen Breakdown in Plane-Plane Electrode Geometry From 100-250 kPa

Liquid nitrogen (LN 2 ) is used as the cryogen and dielectric for many high temperature superconducting, high voltage applications. When a quench in the superconductor occurs, bubbles are generated which can affect the dielectric breakdown properties of the LN 2 . Experiments were performed using pl...

Full description

Saved in:
Bibliographic Details
Published in:IEEE transactions on applied superconductivity 2011-06, Vol.21 (3), p.1892-1895
Main Authors: Sauers, I, James, R, Ellis, A, Tuncer, E, Polizos, G, Pace, M
Format: Article
Language:English
Subjects:
Applied sciences
BREAKDOWN
Bridge circuits
BUBBLES
CRYOGENIC FLUIDS
CURRENT LIMITERS
DESIGN
DIELECTRIC MATERIALS
Electric breakdown
Electric power plants
Electrical engineering. Electrical power engineering
Electrical power engineering
ELECTRODES
Electromagnets
Electronics
Exact sciences and technology
FCL
GEOMETRY
HEATERS
Heating
High temperature
High temperature superconductors
MATERIALS SCIENCE
Miscellaneous
NITROGEN
quench
Semiconductor electronics. Microelectronics. Optoelectronics. Solid state devices
Superconducting devices
SUPERCONDUCTORS
Various equipment and components
{\rm LN}_{2}
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Liquid nitrogen (LN 2 ) is used as the cryogen and dielectric for many high temperature superconducting, high voltage applications. When a quench in the superconductor occurs, bubbles are generated which can affect the dielectric breakdown properties of the LN 2 . Experiments were performed using plane-plane electrode geometry where bubbles were introduced into the gap through a pinhole in the ground electrode. Bubbles were generated using one or more kapton heaters producing heater powers up to 30 W. Pressure was varied from 100-250 kPa. Breakdown strength was found to be relatively constant up to a given heater power and pressure at which the breakdown strength drops to a low value depending on the pressure. After the drop the breakdown strength continues to drop gradually at higher heater power. This is particularly illustrated at 100 kPa. After the drop in breakdown strength the breakdown is believed to be due to the formation of a vapor bridge. Also the heater power at which the breakdown strength changes from that of LN 2 to that of gaseous nitrogen increases with increasing pressure. The data can provide design constraints for high temperature superconducting fault current limiters (FCLs) so that the formation of a vapor bridge can be suppressed or avoided.
ISSN:1051-8223
1558-2515
DOI:10.1109/TASC.2010.2088351