Investigation on Phase Change Behavior of Paraffin Phase Change Material in a Spherical Capsule for Solar Thermal Storage Units

• Published in: Heat transfer engineering 2018-05, Vol.39 (9), p.775-783
• Main Authors: Hariharan, Kandasamy, Kumar, Gowri Sankar Senthil, Kumaresan, Govindaraj, Velraj, Ramalingam
• Format: Article
• Language: English
• Subjects: Aerodynamics; Computational fluid dynamics; Encapsulation; Fluid dynamics; Industrial research; Melting; Phase change materials; Random access memory; Solar heating; Solidification; Storage units; Thermal energy; Thermal storage
• ISSN: 0145-7632; 1521-0537
• DOI: 10.1080/01457632.2017.1341227

In this work, the melting and solidification behaviour of paraffin phase change material encapsulated in a stainless steel spherical container has been studied experimentally. A computational fluid dynamics analysis has also been performed for the encapsulated phase change material (PCM) during phase change process. In the melting process, the hot air, used as the heat transfer fluid enters the test section and flows over the spherical capsule resulting in the melting of phase change material. In the solidification process, the ambient air flows over the capsule and received heat from phase change material resulting in the solidification of phase change material. In the computational fluid dynamics, the constant wall boundary condition is employed for both melting (75°C) and solidification (36°C) processes since the internal conductive resistance offered by the PCM is much higher compared to the outer surface convective resistance. The time required for complete solidification and melting of the phase change material obtained from the computational fluid dynamics analysis are validated with the experimental results and a reasonable agreement is achieved. The reason for the deviation between the results are analyzed and reported.