A new hybrid observer based rotor imbalance vibration control via passive autobalancer and active bearing actuation

• Published in: Journal of sound and vibration 2018-02, Vol.415, p.1-24
• Main Authors: Jung, DaeYi, DeSmidt, Hans
• Format: Article
• Language: English
• Subjects: Active magnetic bearing; Actuation; Algorithms; Automotive wheels; Bearings; CD-ROM; Control stability; Energy storage; Equilibrium; Flywheels; Hybrid control; Hybrid control systems; Limit-cycles; Magnetic bearings; Passive automaticbalancer (ABD); Reaction wheels; Region of attraction; Rotor speed; Storage batteries; Vibration; Vibration control
• ISSN: 0022-460X; 1095-8568
• DOI: 10.1016/j.jsv.2017.11.024

Many researchers have explored the use of active bearings, such as non-contact Active Magnetic Bearings (AMB), to control imbalance vibration in rotor systems. Meanwhile, the advantages of a passive Auto-balancer device (ABD) eliminating the imbalance effect of rotor without using other active means have been recently studied. This paper develops a new hybrid imbalance vibration control approach for an ABD-rotor system supported by a normal passive bearing in augmented with an AMB to enhance the balancing and vibration isolation capabilities. Essentially, an ABD consists of several freely moving eccentric balancing masses mounted on the rotor, which, at supercritical operating speeds, act to cancel the rotor's imbalance at steady-state. However, due to the inherent nonlinearity of the ABD, the potential for other, non-synchronous limit-cycle behavior exists resulting in increased rotor vibration. To address this, the algorithm of proposed hybrid control is designed to guarantee globally asymptotic stability of the synchronous balanced condition. This algorithm also incorporates with a “Luenberger-like” observer that continuously estimates the states of a balancer ball circulating around within ABD. In particular, it is shown that the balanced equilibrium can be made globally attractive under the hybrid control strategy, and that the control power levels of AMB are significantly reduced via the addition of the ABD because the control is designed such that it is only switched on for the abnormal operation of ABD and will be disengaged otherwise. Moreover, unlike other imbalance vibration control applications based upon ABD such as rotor speed regulator [21,22], this approach enables the controller to achieve the desirable performance without altering rotor speed once the rotor initially reaches the target speed. These applications are relevant to limited power applications such as in satellite reaction wheels, flywheel energy storage batteries or CD-ROM application.