Femtosecond pulsed laser micro-machining of glass substrates with application to microfluidic devices

We describe a technique for surface and sub-surface micro-machining of glass substrates using tightly focused femtosecond laser pulses at a wavelength of 1660 nm. Although silicate glass is normally transparent at this wavelength, the extremely high intensity of the focused beam causes multi-photon...

Full description

Saved in:
Bibliographic Details
Published in:arXiv.org 2017-08
Main Authors: Giridhar, M S, Kibyung Seong, Schülzgen, Axel, Khulbe, Pramod, Peyghambarian, Nasser, Mansuripur, Masud
Format: Article
Language:English
Subjects:
Ablation
Canals
Chambers
Cover plates
Femtosecond pulsed lasers
Flat surfaces
Glass plates
Glass substrates
Ion beams
Laser machining
Lasers
Microchannels
Microfluidic devices
Micromachining
Photon absorption
Point contact
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:We describe a technique for surface and sub-surface micro-machining of glass substrates using tightly focused femtosecond laser pulses at a wavelength of 1660 nm. Although silicate glass is normally transparent at this wavelength, the extremely high intensity of the focused beam causes multi-photon absorption, resulting in localized ablation of the glass substrate. Ablation is strictly confined to the vicinity of focus, leaving the rest of the substrate unaffected. We exploit this phenomenon to drill a micro-hole through a thin vertical wall that separates two adjacent pits machined by the same laser in a glass plate. A salient feature of pulsed laser micro-machining, therefore, is its ability to drill sub-surface tunnels and canals into glass substrates, a process that requires multiple steps in standard lithography. To demonstrate a potential application of this micro-machining technique, we have fabricated simple micro-fluidic structures on a glass plate. To prevent the evaporation of liquids in open micro-channels and micro-chambers thus fabricated requires a cover plate that seals the device by making point-to-point contact with the flat surface of the substrate. This point-to-point contacting is essential if the fluids are to remain confined within their various channels and chambers on the chip, without leaking into neighboring regions. Methods of protecting and sealing the micro-machined structures for microfluidic applications are also discussed.
ISSN:2331-8422
DOI:10.48550/arxiv.1708.08140