Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear‐resistant hierarchical nanocomposites

Polylactic acid (PLA) and graphene reinforced polylactic acid (PLA‐graphene) composites have been fabricated by three‐dimensional (3D) fused deposition modeling (FDM) printing. Indentation creep resistance was analyzed in terms of the strain‐rate sensitivity index of PLA (0.11) and PLA‐graphene (0.2...

Full description

Saved in:
Bibliographic Details
Published in:Polymer composites 2018-11, Vol.39 (11), p.3877-3888
Main Authors: Bustillos, Jenniffer, Montero, Daniela, Nautiyal, Pranjal, Loganathan, Archana, Boesl, Benjamin, Agarwal, Arvind
Format: Article
Language:English
Subjects:
3-D printers
Acid resistance
Biodegradable materials
Coefficient of friction
Creep strength
Fused deposition modeling
Graphene
Indentation
Nanocomposites
Polylactic acid
Polymers
Sensitivity analysis
Strain rate sensitivity
Three dimensional models
Three dimensional printing
Tribology
Wear resistance
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
cited_by cdi_FETCH-LOGICAL-c4122-192e8c3d8bedbcfd7015cdadc4bce4520b018a24bea6cd3b36b0added07dfadf3
cites cdi_FETCH-LOGICAL-c4122-192e8c3d8bedbcfd7015cdadc4bce4520b018a24bea6cd3b36b0added07dfadf3
container_end_page 3888
container_issue 11
container_start_page 3877
container_title Polymer composites
container_volume 39
creator Bustillos, Jenniffer
Montero, Daniela
Nautiyal, Pranjal
Loganathan, Archana
Boesl, Benjamin
Agarwal, Arvind
description Polylactic acid (PLA) and graphene reinforced polylactic acid (PLA‐graphene) composites have been fabricated by three‐dimensional (3D) fused deposition modeling (FDM) printing. Indentation creep resistance was analyzed in terms of the strain‐rate sensitivity index of PLA (0.11) and PLA‐graphene (0.21). Enhanced creep resistance in PLA‐graphene is attributed to the restriction of the polymeric chains by graphene, caused by low strain rates identified during secondary creep. The tribological properties of PLA and PLA‐graphene composites were evaluated by ball‐on‐disk wear tests. Wear resistance was increased by a 14% in PLA‐graphene as compared to PLA. A two‐stage coefficient of friction (COF) behavior has been observed for PLA‐graphene. Initially, PLA‐graphene exhibits a 65% decrease in COF as compared to PLA. During the second stage, PLA‐graphene approached similar COF behavior and value of PLA (∼0.58). PLA‐graphene composites have shown significant improvement in creep and wear resistance demonstrating 3D printing to be a novel manufacturing route. POLYM. COMPOS., 39:3877–3888, 2018. © 2017 Society of Plastics Engineers
doi_str_mv 10.1002/pc.24422
format article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2137480539</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2137480539</sourcerecordid><originalsourceid>FETCH-LOGICAL-c4122-192e8c3d8bedbcfd7015cdadc4bce4520b018a24bea6cd3b36b0added07dfadf3</originalsourceid><addsrcrecordid>eNp10MtKAzEUBuAgCtYL-AgBN3UxNZe5dSn1VijoQtdD5uRMGxmTmKRKF4KP4DP6JI7WratzFh__4fyEnHA24YyJcw8TkedC7JARL_I6Y0U53SUjJiqR1XJa7ZODGJ8GyctSjsj73CZcBpWMs9R1dFj9Ci1SY6l3_WbcK0gGzqgCo2m7ofKS-mBsMnZJk6MaX7F3nkJA9FRZTd9Qha-Pz4DRxKRsoiuDQQVYGVA9tco6cM_eRZMwHpG9TvURj__mIXm8vnqY3WaLu5v57GKRQc6FyPhUYA1S1y3qFjpdMV6AVhryFjAvBGsZr5XIW1QlaNnKsmVKa9Ss0p3SnTwkp9tcH9zLGmNqntw62OFkI7is8poVcjqo8VZBcDEG7Jrh02cVNg1nzU-5jYfmt9yBZlv6Znrc_Oua-9nWfwN5SH61</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2137480539</pqid></control><display><type>article</type><title>Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear‐resistant hierarchical nanocomposites</title><source>Wiley</source><creator>Bustillos, Jenniffer ; Montero, Daniela ; Nautiyal, Pranjal ; Loganathan, Archana ; Boesl, Benjamin ; Agarwal, Arvind</creator><creatorcontrib>Bustillos, Jenniffer ; Montero, Daniela ; Nautiyal, Pranjal ; Loganathan, Archana ; Boesl, Benjamin ; Agarwal, Arvind</creatorcontrib><description>Polylactic acid (PLA) and graphene reinforced polylactic acid (PLA‐graphene) composites have been fabricated by three‐dimensional (3D) fused deposition modeling (FDM) printing. Indentation creep resistance was analyzed in terms of the strain‐rate sensitivity index of PLA (0.11) and PLA‐graphene (0.21). Enhanced creep resistance in PLA‐graphene is attributed to the restriction of the polymeric chains by graphene, caused by low strain rates identified during secondary creep. The tribological properties of PLA and PLA‐graphene composites were evaluated by ball‐on‐disk wear tests. Wear resistance was increased by a 14% in PLA‐graphene as compared to PLA. A two‐stage coefficient of friction (COF) behavior has been observed for PLA‐graphene. Initially, PLA‐graphene exhibits a 65% decrease in COF as compared to PLA. During the second stage, PLA‐graphene approached similar COF behavior and value of PLA (∼0.58). PLA‐graphene composites have shown significant improvement in creep and wear resistance demonstrating 3D printing to be a novel manufacturing route. POLYM. COMPOS., 39:3877–3888, 2018. © 2017 Society of Plastics Engineers</description><identifier>ISSN: 0272-8397</identifier><identifier>EISSN: 1548-0569</identifier><identifier>DOI: 10.1002/pc.24422</identifier><language>eng</language><publisher>Newtown: Blackwell Publishing Ltd</publisher><subject>3-D printers ; Acid resistance ; Biodegradable materials ; Coefficient of friction ; Creep strength ; Fused deposition modeling ; Graphene ; Indentation ; Nanocomposites ; Polylactic acid ; Polymers ; Sensitivity analysis ; Strain rate sensitivity ; Three dimensional models ; Three dimensional printing ; Tribology ; Wear resistance</subject><ispartof>Polymer composites, 2018-11, Vol.39 (11), p.3877-3888</ispartof><rights>2017 Society of Plastics Engineers</rights><rights>2018 Society of Plastics Engineers</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c4122-192e8c3d8bedbcfd7015cdadc4bce4520b018a24bea6cd3b36b0added07dfadf3</citedby><cites>FETCH-LOGICAL-c4122-192e8c3d8bedbcfd7015cdadc4bce4520b018a24bea6cd3b36b0added07dfadf3</cites><orcidid>0000-0002-7052-653X</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27924,27925</link.rule.ids></links><search><creatorcontrib>Bustillos, Jenniffer</creatorcontrib><creatorcontrib>Montero, Daniela</creatorcontrib><creatorcontrib>Nautiyal, Pranjal</creatorcontrib><creatorcontrib>Loganathan, Archana</creatorcontrib><creatorcontrib>Boesl, Benjamin</creatorcontrib><creatorcontrib>Agarwal, Arvind</creatorcontrib><title>Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear‐resistant hierarchical nanocomposites</title><title>Polymer composites</title><description>Polylactic acid (PLA) and graphene reinforced polylactic acid (PLA‐graphene) composites have been fabricated by three‐dimensional (3D) fused deposition modeling (FDM) printing. Indentation creep resistance was analyzed in terms of the strain‐rate sensitivity index of PLA (0.11) and PLA‐graphene (0.21). Enhanced creep resistance in PLA‐graphene is attributed to the restriction of the polymeric chains by graphene, caused by low strain rates identified during secondary creep. The tribological properties of PLA and PLA‐graphene composites were evaluated by ball‐on‐disk wear tests. Wear resistance was increased by a 14% in PLA‐graphene as compared to PLA. A two‐stage coefficient of friction (COF) behavior has been observed for PLA‐graphene. Initially, PLA‐graphene exhibits a 65% decrease in COF as compared to PLA. During the second stage, PLA‐graphene approached similar COF behavior and value of PLA (∼0.58). PLA‐graphene composites have shown significant improvement in creep and wear resistance demonstrating 3D printing to be a novel manufacturing route. POLYM. COMPOS., 39:3877–3888, 2018. © 2017 Society of Plastics Engineers</description><subject>3-D printers</subject><subject>Acid resistance</subject><subject>Biodegradable materials</subject><subject>Coefficient of friction</subject><subject>Creep strength</subject><subject>Fused deposition modeling</subject><subject>Graphene</subject><subject>Indentation</subject><subject>Nanocomposites</subject><subject>Polylactic acid</subject><subject>Polymers</subject><subject>Sensitivity analysis</subject><subject>Strain rate sensitivity</subject><subject>Three dimensional models</subject><subject>Three dimensional printing</subject><subject>Tribology</subject><subject>Wear resistance</subject><issn>0272-8397</issn><issn>1548-0569</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2018</creationdate><recordtype>article</recordtype><recordid>eNp10MtKAzEUBuAgCtYL-AgBN3UxNZe5dSn1VijoQtdD5uRMGxmTmKRKF4KP4DP6JI7WratzFh__4fyEnHA24YyJcw8TkedC7JARL_I6Y0U53SUjJiqR1XJa7ZODGJ8GyctSjsj73CZcBpWMs9R1dFj9Ci1SY6l3_WbcK0gGzqgCo2m7ofKS-mBsMnZJk6MaX7F3nkJA9FRZTd9Qha-Pz4DRxKRsoiuDQQVYGVA9tco6cM_eRZMwHpG9TvURj__mIXm8vnqY3WaLu5v57GKRQc6FyPhUYA1S1y3qFjpdMV6AVhryFjAvBGsZr5XIW1QlaNnKsmVKa9Ss0p3SnTwkp9tcH9zLGmNqntw62OFkI7is8poVcjqo8VZBcDEG7Jrh02cVNg1nzU-5jYfmt9yBZlv6Znrc_Oua-9nWfwN5SH61</recordid><startdate>201811</startdate><enddate>201811</enddate><creator>Bustillos, Jenniffer</creator><creator>Montero, Daniela</creator><creator>Nautiyal, Pranjal</creator><creator>Loganathan, Archana</creator><creator>Boesl, Benjamin</creator><creator>Agarwal, Arvind</creator><general>Blackwell Publishing Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>8FD</scope><scope>JG9</scope><orcidid>https://orcid.org/0000-0002-7052-653X</orcidid></search><sort><creationdate>201811</creationdate><title>Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear‐resistant hierarchical nanocomposites</title><author>Bustillos, Jenniffer ; Montero, Daniela ; Nautiyal, Pranjal ; Loganathan, Archana ; Boesl, Benjamin ; Agarwal, Arvind</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c4122-192e8c3d8bedbcfd7015cdadc4bce4520b018a24bea6cd3b36b0added07dfadf3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2018</creationdate><topic>3-D printers</topic><topic>Acid resistance</topic><topic>Biodegradable materials</topic><topic>Coefficient of friction</topic><topic>Creep strength</topic><topic>Fused deposition modeling</topic><topic>Graphene</topic><topic>Indentation</topic><topic>Nanocomposites</topic><topic>Polylactic acid</topic><topic>Polymers</topic><topic>Sensitivity analysis</topic><topic>Strain rate sensitivity</topic><topic>Three dimensional models</topic><topic>Three dimensional printing</topic><topic>Tribology</topic><topic>Wear resistance</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Bustillos, Jenniffer</creatorcontrib><creatorcontrib>Montero, Daniela</creatorcontrib><creatorcontrib>Nautiyal, Pranjal</creatorcontrib><creatorcontrib>Loganathan, Archana</creatorcontrib><creatorcontrib>Boesl, Benjamin</creatorcontrib><creatorcontrib>Agarwal, Arvind</creatorcontrib><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Polymer composites</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Bustillos, Jenniffer</au><au>Montero, Daniela</au><au>Nautiyal, Pranjal</au><au>Loganathan, Archana</au><au>Boesl, Benjamin</au><au>Agarwal, Arvind</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear‐resistant hierarchical nanocomposites</atitle><jtitle>Polymer composites</jtitle><date>2018-11</date><risdate>2018</risdate><volume>39</volume><issue>11</issue><spage>3877</spage><epage>3888</epage><pages>3877-3888</pages><issn>0272-8397</issn><eissn>1548-0569</eissn><abstract>Polylactic acid (PLA) and graphene reinforced polylactic acid (PLA‐graphene) composites have been fabricated by three‐dimensional (3D) fused deposition modeling (FDM) printing. Indentation creep resistance was analyzed in terms of the strain‐rate sensitivity index of PLA (0.11) and PLA‐graphene (0.21). Enhanced creep resistance in PLA‐graphene is attributed to the restriction of the polymeric chains by graphene, caused by low strain rates identified during secondary creep. The tribological properties of PLA and PLA‐graphene composites were evaluated by ball‐on‐disk wear tests. Wear resistance was increased by a 14% in PLA‐graphene as compared to PLA. A two‐stage coefficient of friction (COF) behavior has been observed for PLA‐graphene. Initially, PLA‐graphene exhibits a 65% decrease in COF as compared to PLA. During the second stage, PLA‐graphene approached similar COF behavior and value of PLA (∼0.58). PLA‐graphene composites have shown significant improvement in creep and wear resistance demonstrating 3D printing to be a novel manufacturing route. POLYM. COMPOS., 39:3877–3888, 2018. © 2017 Society of Plastics Engineers</abstract><cop>Newtown</cop><pub>Blackwell Publishing Ltd</pub><doi>10.1002/pc.24422</doi><tpages>12</tpages><orcidid>https://orcid.org/0000-0002-7052-653X</orcidid></addata></record>
fulltext fulltext
identifier ISSN: 0272-8397
ispartof Polymer composites, 2018-11, Vol.39 (11), p.3877-3888
issn 0272-8397
1548-0569
language eng
recordid cdi_proquest_journals_2137480539
source Wiley
subjects 3-D printers
Acid resistance
Biodegradable materials
Coefficient of friction
Creep strength
Fused deposition modeling
Graphene
Indentation
Nanocomposites
Polylactic acid
Polymers
Sensitivity analysis
Strain rate sensitivity
Three dimensional models
Three dimensional printing
Tribology
Wear resistance
title Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear‐resistant hierarchical nanocomposites
url http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-25T08%3A18%3A14IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Integration%20of%20graphene%20in%20poly(lactic)%20acid%20by%203D%20printing%20to%20develop%20creep%20and%20wear%E2%80%90resistant%20hierarchical%20nanocomposites&rft.jtitle=Polymer%20composites&rft.au=Bustillos,%20Jenniffer&rft.date=2018-11&rft.volume=39&rft.issue=11&rft.spage=3877&rft.epage=3888&rft.pages=3877-3888&rft.issn=0272-8397&rft.eissn=1548-0569&rft_id=info:doi/10.1002/pc.24422&rft_dat=%3Cproquest_cross%3E2137480539%3C/proquest_cross%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-c4122-192e8c3d8bedbcfd7015cdadc4bce4520b018a24bea6cd3b36b0added07dfadf3%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_pqid=2137480539&rft_id=info:pmid/&rfr_iscdi=true