Simulation of nanofluid dryout phenomenon in a PWR rod bundle with mixing vanes using computational fluid dynamics

Critical Heat Flux (CHF) threshold is one of the vital issues to be considered in nuclear power plants. One way to address this problem is to add nanoparticles to the base fluid in order to enhance the heat transfer capacity. In this research, the influence of alumina nanoparticles in the presence o...

Full description

Saved in:
Bibliographic Details
Published in:Progress in nuclear energy (New series) 2018-11, Vol.109, p.270-279
Main Authors: Rabiee, Ataollah, Atf, Alireza
Format: Article
Language:English
Subjects:
Alumina
Alumina nanoparticles
Aluminum oxide
Computational fluid dynamics
Computer simulation
Critical heat flux
Film boiling
Flow boiling
Heat flux
Heat transfer
Heat transfer coefficients
Mixing vane
Nanofluids
Nanoparticles
Nuclear power plants
Pressurized water reactors
Simulation
Spacer grid
Vanes
Wall temperature
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Critical Heat Flux (CHF) threshold is one of the vital issues to be considered in nuclear power plants. One way to address this problem is to add nanoparticles to the base fluid in order to enhance the heat transfer capacity. In this research, the influence of alumina nanoparticles in the presence of mixing vanes on dryout phenomenon has been numerically investigated. It was observed that nanoparticles in the host fluid, besides the presence of mixing vanes attached to the spacer grid lead to delayed sudden changes in the wall temperature. It was found that with nanoparticles concentration of approximately 8 percent, the abrupt rise in temperature takes place near the channel exit and with 9 vol % concentration, CHF phenomenon would not occur. Regarding the obtained results, in a certain nanoparticles concentration (9 vol%), film boiling would not occur and for the formation of dryout phenomenon in such concentrations, exerted wall heat flux should be increased to about 9.4% of the primary heat flux magnitude. Comparing the results in flow boiling revealed that increase in nanoparticles concentration imposes a growing trend on the magnitude of both convective and boiling heat transfer coefficients according to the Chen's relation.
ISSN:0149-1970
1878-4224
DOI:10.1016/j.pnucene.2018.08.017