Numerical investigation of flame propagation in pulse detonation engine with variation of obstacle clearance

• Published in: Journal of thermal analysis and calorimetry 2020-06, Vol.140 (5), p.2485-2495
• Main Authors: Alam, Noor, Sharma, K. K., Pandey, K. M.
• Format: Article
• Language: English
• Subjects: Acceleration; Aerodynamics; Analysis; Analytical Chemistry; Chemical reaction, Rate of; Chemistry; Chemistry and Materials Science; Combustion; Combustion chambers; Computational fluid dynamics; Computer simulation; Deflagration; Detonation waves; Diameters; Exothermic reactions; Flame propagation; Hydrogen; Inorganic Chemistry; Investigations; K-epsilon turbulence model; Measurement Science and Instrumentation; Physical Chemistry; Polymer Sciences; Pulse propagation; Pulsed detonation wave engines; Reaction kinetics; Reduction; Three dimensional models; Thrust; Turbulence models; Wave propagation
• ISSN: 1388-6150; 1588-2926
• DOI: 10.1007/s10973-019-08948-5

The objective of present research work is to investigate the combustion flame acceleration and performance of pulse detonation engine (PDE). The PDE tube consisting of obstacles of varying gap with fixed blockage ratio is analyzed in the current study. The three-dimensional reactive Navier–Stokes equation along with realizable k – ε turbulence model is used to simulate the combustion phenomena of hydrogen–air mixture. The one-step irreversible chemical kinetics model analyzes detailed mechanism of exothermic reaction. The propagation of flame and deflagration-to-detonation transition (DDT) run-up length is based on normal propagating regime. As the gap between combustor inner surface and obstacle outer diameter increases, the propagating area near the combustor axis reduces. Therefore, loss of momentum of turbulence combustion particle and unburnt fuel particles (voids) are increased at the wake of obstacle due to the increase in gap (or reduction in obstacle outer diameter), which results reduction in detonation wave velocity and detonation total pressure. However, DDT flame run-up length increases with lower temperature along the axis of PDE combustor. The thrust force generated by PDE combustor also gets reduced as the obstacle diameter is reduced.