Development of a toolholder with high dynamic stiffness for mitigating chatter and improving machining efficiency in face milling

• Published in: Mechanical systems and signal processing 2020-11, Vol.145, p.106928, Article 106928
• Main Authors: Xia, Yan, Wan, Yi, Luo, Xichun, Wang, Hongwei, Gong, Ning, Cao, Jinglong, Liu, Zhanqiang, Song, Qinghua
• Format: Article
• Language: English
• Subjects: Cantilever beams; Chatter; Chatter suppression; Damping; Diameters; Dynamic characteristics; Dynamic models; Dynamic stability; Dynamic stiffness; Face milling; Finite element method; Length-diameter ratio; Milling toolholder; Stability analysis; Stiffness; Strain energy methods; Tool holders; Variable cross-sections; Vibration mode
• ISSN: 0888-3270; 1096-1216
• DOI: 10.1016/j.ymssp.2020.106928

•The theoretical results show that the increasing dynamics stiffness can enhance the limit axial depth of cut.•A novel toolholder with high dynamic stiffness is developed to mitigate chatter.•The damping characteristic of the novel toolholder is analysed qualitatively based on the strain energy method.•Compared with the conventional toolholder, the chatter stability and material removing rate of the novel toolholder is significantly improved. The toolholders featuring large length-diameter ratio and variable cross-sections are growingly required to conduct certain machining tasks in face milling operation. However, the weak dynamic characteristics of this kind of toolholder can easily cause chatter, and its special structure creates further obstacles to chatter suppression. This paper develops a novel toolholder with high dynamic stiffness to improve the chatter stability. Taking the effect of multiple order vibration modes into consideration, a dynamic model for face milling operation is established to investigate the relationship between the stability performance and modal parameters of the machining system. The theoretical analysis shows that the increasing dynamic stiffness can enhance the limit axial depth of cut. Based on this finding, the novel toolholder is designed with the assistance of the embedded stair-step strips and damping core, and its dynamic characteristics are qualitatively analysed by the extended strain energy method and cantilever beam theory. Then, the optimal design of geometrical dimensions and related materials of the novel toolholder is performed by the finite element method (FEM). Finally, the novel toolholder is manufactured, and then verified by tool point dynamics tests and milling experiments. Compared with the conventional toolholder, the measured results show that the dynamic stiffness and material removing rate (MRR) of the novel toolholder are increased by 3.75 and 2.81 times, respectively.