Reactive computational fluid dynamics modelling of methane–hydrogen admixtures in internal combustion engines: Part I – RANS

• Published in: International journal of engine research 2021-05, Vol.22 (5), p.1525-1539
• Main Authors: Koch, Jann, Schürch, Christian, Wright, Yuri M, Boulouchos, Konstantinos
• Format: Article
• Language: English
• Subjects: Admixtures; Computational fluid dynamics; Engine cylinders; Exhaust gases; Flame speed; Fluid dynamics; Fluid flow; Fuels; Heat release rate; Hydrogen; Internal combustion engines; Knock; Methane; Natural gas; Spark ignition; Three dimensional models; Turbulent flames
• ISSN: 1468-0874; 2041-3149
• DOI: 10.1177/1468087420916380

The effects of hydrogen addition to internal combustion engines operated by natural gas/methane has been widely demonstrated experimentally in the literature. Already small hydrogen contents in the fuel show promising benefits with respect to increased engine efficiency, lower CO2 emissions, extended lean operating limits and a higher exhaust gas recirculation tolerance while maintaining the knock resistance of methane. In this article, the influence of hydrogen addition to methane on a spark ignited single cylinder engine is investigated. This article proposes a modelling approach to consider hydrogen addition within three-dimensional reactive computational fluid dynamics in order to establish a framework to gain further insights into the involved processes. Experiments have been performed on a single-cylinder spark-ignition engine situated at a test bed and cater as reference data for validating the proposed reactive computational fluid dynamics modelling approach based around the G-Equation combustion model. Within the course of the first part, crucial aspects relevant to the modelling of the mean engine cycle are highlighted. In this article, a simplified early combustion phase model which considers the transition towards a fully developed turbulent flame following ignition is introduced, along with a second submodel considering combined effects of the walls. The sensitivity of the combustion process towards the modelling approach is presented. The submodels were calibrated for a reference operating point, and a sweep in hydrogen content in the fuel as well as stoichiometric and lean operation has been considered. It is shown that the flame speed coefficient A appearing in the used turbulent flame speed closure, weighting the influence of the turbulent fluctuating speed u ′ , has to be adjusted for different hydrogen contents. The introduced submodels allowed for significant improvement of the in-cylinder pressure and heat release rate evolution throughout all considered operating conditions.