Development of lignocellulosic fiber reinforced cement composite panels using semi-dry technology

• Published in: Cellulose (London) 2021-04, Vol.28 (6), p.3631-3645
• Main Authors: Hasan, K. M. Faridul, Horváth, Péter György, Alpár, Tibor
• Format: Article
• Language: English
• Subjects: Bioorganic Chemistry; Bonding strength; Cement reinforcements; Ceramics; Chemical compounds; Chemistry; Chemistry and Materials Science; Composites; Differential thermal analysis; Differential thermogravimetric analysis; Fiber composites; Fiber orientation; Fiber reinforced cements; Flexural strength; Fourier transforms; Glass; Insulation; Lignocellulose; Mechanical properties; Modulus of rupture in bending; Natural Materials; Organic Chemistry; Original Research; Panels; Physical Chemistry; Polymer Sciences; Portland cements; Reinforced cements; Sodium silicates; Stability analysis; Sustainable Development; Thermal stability; Thermogravimetric analysis; Thermogravimetry; Thickness; Water absorption
• ISSN: 0969-0239; 1572-882X
• DOI: 10.1007/s10570-021-03755-4

There is a growing interest in developing cement bonded lignocellulosic fiber (LF) composites with enhanced mechanical performances. This study assessed the possibility of developing composite panels with 12 mm thickness and around 1200 kg/m 3 nominal densities from ordinary Portland cements (OPC) and mixed LFs from seven different woody plants found in Hungary. Once the mixed LFs were sieved and found fine (0–0.6 mm) and medium (0.6–0.8 mm) length fibers. The optimum ratio for LF, OPC, water glass (Na 2 SiO 3 ), and cement stone was found to be 1:3.5:0.7:0.07. The semi-dry process, which is a comparatively cheaper and less labor intensive technology, was used for producing the composites. After 28 days of curing, the composite panels were characterized for mechanical, physical, thermal, and morphological properties. A scanning electron microscopy (SEM) test was conducted to observe the fiber orientation in the matrix before and after the bending test, which showed the clear presence of the fibers in the composites. The FTIR (Fourier transform infrared spectroscopy) was conducted to investigate the presence of chemical compounds of LF in the composite panels. Different physical (water absorption and thickness swelling) characteristics of the composite panels were investigated. Furthermore, mechanical properties (flexural properties and internal bonding strength) of the composite panels were also found to be satisfactory. The flexural modulus and internal bonding strengths of composite panel 2 is higher than other three boards, although the flexural strength is a little lower than composite panel 1. The thermogravimetric analysis and differential thermogravimetry also indicated better thermal stability of composite panels which could be used as potential insulation panel for buildings. Graphic abstract