Loading…
In-situ measurement of interfacial tension: Further insights into effect of interfacial tension on the kinetics of CO2 hydrate formation
Hydrate-based CO2 capture and sequestration has been viewed as one of the most attractive technologies due to its environmental friendliness and relatively moderate temperature and pressure conditions. In current work, the kinetics of CO2 hydrate formation was investigated at pressures of 2.5–3.5 MP...
Saved in:
Published in: | Energy (Oxford) 2022-01, Vol.239, p.122143, Article 122143 |
---|---|
Main Authors: | , , , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | Hydrate-based CO2 capture and sequestration has been viewed as one of the most attractive technologies due to its environmental friendliness and relatively moderate temperature and pressure conditions. In current work, the kinetics of CO2 hydrate formation was investigated at pressures of 2.5–3.5 MPa and temperatures of 274.15–279.15 K and the effect of interfacial tension on CO2 hydrate formation rate was discussed. The interfacial tension between CO2 and aqueous solution during the hydrate formation was in-situ measured via an axisymmetric drop shape analysis method. Under the experimental conditions of this study, the interfacial tension decreased significantly with increasing pressure, while it did not vary obviously with temperature. As to SDS aqueous solutions, the interfacial tension at the gas-liquid interface decreased approximately 12% and 42% when the SDS concentration was 100 ppm and 500 ppm, respectively. In addition, CO2 hydrate formation rate ascended by 59% and 102% when the SDS concentration is 100 ppm and 500 ppm, respectively. Furthermore, a good linear relationship was observed between hydrate formation rate and ratio of driving force to interfacial tension (R2 = 0.9211). This work provides a new idea for rapid estimation of hydrate formation rate.
•A visual experimental system for in-situ measuring gas-liquid interfacial tension was designed.•The morphology of the CO2 hydrate formation at the gas–liquid interface was captured.•Effect of sodium dodecyl sulfate (SDS) on interfacial tension and kinetics of CO2 hydrate formation was revealed.•A new idea for rapid estimation of hydrate formation rate using gas-liquid interfacial tension was proposed. |
---|---|
ISSN: | 0360-5442 1873-6785 |
DOI: | 10.1016/j.energy.2021.122143 |