Investigation on mechanical, dynamic mechanical analysis, thermal conductivity, morphological analysis, and biodegradability properties of hybrid fiber mats reinforced HLCE resin nanocomposites

• Published in: Polymer composites 2022-12, Vol.43 (12), p.8850-8859
• Main Authors: P, Prabhu, B, Karthikeyan, R, Ravi Raja Malar Vannan, A, Balaji
• Format: Article
• Language: English
• Subjects: Bamboo; Biocompatibility; Biodegradability; biodegradable property; Chemical elements; Compressive strength; Cotton; Damping; Dynamic mechanical analysis; Environmental protection; Epoxy resins; Fourier transforms; Heat conductivity; Heat transfer; Hybrid composites; hybrid fiber mats; hybrid resin; Infrared analysis; Infrared spectroscopy; Jute; Mechanical properties; Nanocomposites; NaOH treatment; Resin matrix composites; Storage modulus; Synthetic fibers; Synthetic resins; Thermal conductivity
• ISSN: 0272-8397; 1548-0569
• DOI: 10.1002/pc.27066

Hybrid composites are created by the combination of natural fibers (cotton, bamboo, jute, etc.) and synthetic fibers (glass) reinforced hybrid/natural/synthetic resin matrix composites which have good mechanical properties due to reasons of processability, reusability, renewability, and good biocompatibility compared with synthetic composites. Composites made of hybrid resin can replace epoxy resin and increase both biodegradability and environmental protection. In this work, NaOH untreated and treated hybrid fiber mats with volume (2, 4, and 6) % of nanofiller (NCF) mixed in each composition in hybrid resin to form hybrid composites are prepared by compression Hand‐lay‐up technique and then investigated. Hybrid composites are examined by utilizing the following equipment Fourier transform infrared spectrometry (FT‐IR), dynamic mechanical analysis (DMA), thermal conductivity test, and biodegradability property is also studied in this paper. The results of the experiments have demonstrated that the treated H1 fiber mats reinforced with hybrid lannea coromandelica epoxy (HLCE) matrix resin at 4% vol% of NCF have superior compression strength (67.8 MPa). The maximum thermal conductivity of 0.35 W/mK is found in hybrid composites with treated H3 fiber mat and 4% NCF reinforcement in HLCE matrix. According to the findings of dynamic mechanical analysis (DMA), the results indicate that untreated and treated hybrid composites have the highest storage modulus and the lowest damping factor in comparison with HLCE resin. FTIR analysis is used to identify the presence of chemical elements in hybrid resin and hybrid composites.