Investigating defects in InGaN based optoelectronics: from material and device perspective

• Published in: Materials research express 2023-02, Vol.10 (2), p.24004
• Main Authors: Nag, Dhiman, Bhunia, Swagata, Sarkar, Ritam, Chatterjee, Soumyadip, Laha, Apurba
• Format: Article
• Language: English
• Subjects: defect saturation; Defects; Electrical measurement; green gap; High resolution electron microscopy; Indium gallium nitrides; InGaN; Investigations; Light emitting diodes; MBE growth; Microscopy; Molecular beam epitaxy; Multi Quantum Wells; Nanowires; Optoelectronics; Photoluminescence; Quality assessment; Temperature dependence
• ISSN: 2053-1591; 2053-1591
• DOI: 10.1088/2053-1591/acb759

III-nitride optoelectronics have revolutionized solid-state lighting technology. However, non-radiative defects play a major bottleneck in determining the performance of InGaN-based optoelectronics devices. It becomes especially challenging when high indium is required to be incorporated to obtain emission at higher wavelength (>500 nm). In this research article, we are going to discuss our investigation on the origin of defects in InGaN-based optoelectronics devices from the material and device perspective and characterize them through various techniques. This article broadly consists of two parts. In the first part, we investigate defects in InGaN based optoelectronics from a material point of view. Here, we discuss the challenges in the growth of InGaN planar (2-dimensional) and nanowires (1-dimensional) with high indium (≥20%) incorporation using the plasma-assisted molecular beam epitaxy (PA-MBE) technique. Photoluminescence spectroscopy (PL) has been performed to characterize these grown samples to assess their optical quality. Atomic force microscopy (AFM) has been employed to characterize the surface morphology of grown InGaN layers. High-resolution transmission electron microscopy (HRTEM) and scanning electron microcopy (SEM) are also used to characterize InGaN planar and nanowire samples grown under various process conditions. In the second part, we investigate the role of defects on InGaN optoelectronics from a device point of view. Here, we discuss the fabrication of InGaN multi-quantum well-based light emitting diodes (LEDs). Temperature-dependent current versus voltage measurements are carried out to investigate the role of defects on carrier dynamics under forward and reverse bias conditions. Frequency-dependent capacitance versus voltage (CV) and conductance versus voltage (GV) techniques are employed extensively to characterize defects in fabricated InGaN LEDs.