Loading…

Characterization of the LED filament lamp for luminous intensity calibration

Light-emitting diode (LED) is now the main type of light source in global lighting marketing. However, traditional photometry with the incandescent standard lamp is not sufficient to implement high-level LED photometric measurement, since a considerable spectral mismatch error may exist if the photo...

Full description

Saved in:
Bibliographic Details
Published in:Metrologia 2023-04, Vol.60 (2), p.25004
Main Authors: Zhao, Weiqiang, Yan, Jinyun, Liu, Hui, Su, Ying, Lin, Yandong
Format: Article
Language:English
Subjects:
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Light-emitting diode (LED) is now the main type of light source in global lighting marketing. However, traditional photometry with the incandescent standard lamp is not sufficient to implement high-level LED photometric measurement, since a considerable spectral mismatch error may exist if the photometer has a large general V ( λ ) mismatch index f 1 ′ . The LED standard lamp is proposed to be the complementary transfer standard for photometry to reduce this measurement uncertainty. National Institute of Metrology, China (NIM) has previously reported a type of LED filament lamp for total luminous flux. In this article, NIM demonstrates another type of LED filament lamp for luminous intensity calibration. The LED filaments are sealed in a T90 cylinder glass bulb as emitters, and have a spectrum similar to the reference white LED spectrum considered in Commission on Illumination technical committee 2–90. The LED lamp uses the E27 screw base as the connector, and is compatible with the traditional alignment approaches. The warm-up time is less than 12 min. The output change of a group of 12 lamps, over nearly two years of storage and 1 h operation every day during the whole long-term test, is found to be ±0.2% or less for most of the lamps. The ageing effect of one lamp over a continuous 6500 h of burning is estimated to be −0.014% per 100 h, and it is significantly lower than 1% per 100 h, the typical drift rate of the traditional incandescent luminous intensity lamp. In the aspect of the coincidence with inverse square law, the LED lamp has a similar performance to the WI41/G lamp, the traditional luminous intensity lamp.
ISSN:0026-1394
1681-7575
DOI:10.1088/1681-7575/acb70e