Stable chemical enhancement of passivating nanolayer structures grown by atomic layer deposition on silicon

• Published in: Nanoscale 2023-06, Vol.15 (25), p.1593-165
• Main Authors: Pain, Sophie L, Khorani, Edris, Niewelt, Tim, Wratten, Ailish, Walker, Marc, Grant, Nicholas E, Murphy, John D
• Format: Article
• Language: English
• Subjects: Aluminum oxide; Atomic layer epitaxy; Charging; Critical path; Energy conversion efficiency; Excipients; Fluorination; Hafnium oxide; Hydrofluoric acid; Oxides; Passivity; Photoelectron Spectroscopy; Photoelectrons; Photovoltaic cells; Silicon; Silicon Dioxide; Solar cells; Submerging; Thick films; Thin films
• ISSN: 2040-3364; 2040-3372
• DOI: 10.1039/d3nr01374j

Incorporation of carrier-selective passivating contacts is on the critical path for approaching the theoretical power conversion efficiency limit in silicon solar cells. We have used plasma-enhanced atomic layer deposition (ALD) to create ultra-thin films at the single nanometre-scale which can be subsequently chemically enhanced to have properties suitable for high-performance contacts. Negatively charged 1 nm thick HfO 2 films exhibit very promising passivation properties - exceeding those of SiO 2 and Al 2 O 3 at an equivalent thickness - providing a surface recombination velocity (SRV) of 19 cm s −1 on n -type silicon. Applying an Al 2 O 3 capping layer to form Si/HfO 2 /Al 2 O 3 stacks gives additional passivation, resulting in an SRV of 3.5 cm s −1 . Passivation quality can be further improved via simple immersion in hydrofluoric acid, which results in SRVs < 2 cm s −1 that are stable over time (tested for ∼50 days). Based on corona charging analysis, Kelvin probe measurements and X-ray photoelectron spectroscopy, the chemically induced enhancement is consistent with changes at the dielectric surface and not the Si/dielectric interface, with fluorination of the Al 2 O 3 and underlying HfO 2 films occurring after just 5 s HF immersion. Our results show that passivation is enhanced when the oxides are fluorinated. The Al 2 O 3 top layer of the stack can be thinned down by etching, offering a new route for fabrication of ultra-thin highly passivating HfO 2 -containing nanoscale thin films. Production of a temporally stable chemically enhanced ultra-thin HfO 2 interlayer with excellent passivation for use in photovoltaic passivating contacts.