A Safe Organic/Inorganic Composite Anode for Sodium‐Ion Batteries

• Published in: Advanced energy materials 2024-04, Vol.14 (15), p.n/a
• Main Authors: Li, Zhi, Zhang, Yu, Zhou, Kang, Kong, Taoyi, Zhou, Xing, Hao, Yaming, Huang, Xin, Xu, Jie, Cheng, Yuwen, Liu, Haimei, Guo, Ziyang, Wang, Yonggang
• Format: Article
• Language: English
• Subjects: Alloying; Anodes; Bismuth; Carbon; Cathodes; composite anode; high mass loading; Intercalation compounds; safe anode; Sodium; Sodium-ion batteries
• ISSN: 1614-6832; 1614-6840
• DOI: 10.1002/aenm.202303786

Sodium‐ion batteries (SIBs), based on hard carbon anodes and Na+‐intercalation compound cathodes, have gained significant attention. Nonetheless, hard carbon anodes involve the storage of Na+ at a low potential, typically below 0.1 V (vs Na/Na+), which increases the risk of dendritic Na growth on the anode surface during overcharging. Herein, a safe organic/inorganic composite anode containing tetrasodium 3,4,9,10‐perylenetetracarboxylate (Na4PTC) and Metallic bismuth (Bi) with a weight ratio of 7:2, which exhibits an average potential of 0.7 V (vs Na+/Na) and a capacity of 150 mAh g−1 is proposed. The electrode reaction involves a reversible coordination reaction within the organic host and alloying reactions within the metallic Bi component. Importantly, the organic component efficiently buffers the volume changes in Bi during the alloying reaction, while the metallic Bi enhances the electronic conductivity of the organic material. As a result, this composite anode shows high cycle stability and rate performance, even under high mass loadings ranging from 10 to 50 mg cm−2. Furthermore, it is demonstrated that the Na‐ion full cell, consisting of the composite anode and the Na3V2O2(PO4)2F cathode, exhibits minimal capacity degradation over 100 cycles while maintaining a high areal capacity of 1.1 mA cm−2. Na4PTC possesses a suitable redox potential and exhibits minimal polarization even at high rate, making it a safe anode material. However, its poor electrical conductivity limits its further application. By introducing Bi with a similar redox potential to prepare composite materials, the need for conductive carbon is greatly reduced and the specific capacity of the composite electrodes is also increased. Meanwhile, ultrahigh electrode loading is achieved.