Cost-effective selection of sampling frequencies for regulatory water quality monitoring

• Published in: Environment international 1980, Vol.3 (4), p.297-302
• Main Authors: Loftis, Jim C., Ward, Robert C.
• Format: Article
• Language: English
• ISSN: 0160-4120; 1873-6750
• DOI: 10.1016/0160-4120(80)90141-5

A dynamic programming code was formulated for the purpose of assigning sampling frequencies throughout a regulatory water quality monitoring network in order to optimize the statistical performance of the network while operating within a fixed budgetary constraint. The statistical objective is to achieve the greatest possible station to station uniformity in confidence interval widths about annual geometric means of the measured water quality variables and to keep the average confidence width reasonably small. The objective function is the sum (over several selected variables and all stations) of the normalized positive deviations of the predicted confidence interval widths from preselected design confidence interval widths. The code was designed to account for the effects of deterministic seasonal variation and serial correlation of the water quality observations by incorporating the results of the time series analysis of historical quality data. The economic constraint ensures that the annual operating cost of the system, including direct costs of travel and laboratory analysis, will not exceed the allowable budget. As an example situation, the dynamic programming code was used to assign sampling frequencies to the nine stations in Illinois from which historical quality data had been obtained and analyzed. Using five design quality constituents and representative travel and laboratory costs, an “optimal” design was produced. The optimal design achieved a 10% improvement in uniformity (standard deviation) of confidence interval widths when compared to a more traditional design based on the same budget and using identical sampling frequencies at every station.