Growth of strongly textured $\mathrm{FeCO}_{3}$ thin films for application in research of nuclear quantum optics with ultrashort-pulsed laser deposition

• Published in: Applied physics. A, Materials science & processing Materials science & processing, 2014-05, Vol.115 (2), p.671-677
• Main Authors: Yen, Chih-Ping, Wong, Cheng-Shiuan, Yeh, Chi-Yu, Chen, Yen-Mu, Chu, Hsu-Hsin, Lin, Jiunn-Yuan, Wang, Jyhpyng, Lin, Ping-Hsun, Chen, Szu-yuan
• Format: Article
• Language: English
• Subjects: Ablation; Crystallinity; Deposition; Laser deposition; Lasers; Materials science; Quantum optics; Thin films
• ISSN: 0947-8396; 1432-0630
• DOI: 10.1007/s00339-013-7848-3

Growth of strongly textured $\mathrm{FeCO}_{3}$ thin films on substrates was achieved with ultrashort-pulsed laser deposition using 810-nm, 46-fs ablation pulses. The crystallinity and composition were verified with X-ray diffraction and Raman spectroscopy. Using Mossbauer spectroscopy, it is shown that the deposited $\mathrm{FeCO}_{3}$ thin films possess the film quality required for application in research of nuclear quantum optics. It is found that a relatively low substrate temperature is crucial for growing a strongly textured film of $\mathrm{FeCO}_{3}$ while avoiding decomposition of $\mathrm{FeCO}_{3}$ into $\mathrm{Fe}_{2}\mathrm{O}_{3}$ and $\mathrm{CO}_{2}$ . This supports the importance of the use of ultrashort-pulsed laser deposition in providing adatoms with high mobility for attaining good crystallinity. The surface morphology was characterized by surface profilometry, scanning electron microscopy and atomic force microscopy. It is found to be significantly affected by changing the ablation laser parameters, including laser fluence, pulse duration, and on-target spot size. The results show that the peak deposition flux must be below approximately 0.03 nm/pulse in order to grow a flat film.