Investigations on coupled code PWR simulations using COBRA-TF with soluble boron tracking model

• Published in: Progress in nuclear energy (New series) 2014-11, Vol.77, p.72-83
• Main Authors: Biery, M., Avramova, M.
• Format: Article
• Language: English
• Subjects: Boron; Boron dilution; Boron tracking model; Computer simulation; Coupled code; Fuels; Joining; Natural circulation; Nuclear power generation; Nuclear reactors; Pressurized water reactors; Transport
• ISSN: 0149-1970
• DOI: 10.1016/j.pnucene.2014.06.005

For long term reactivity control over a nuclear reactor core fuel cycle, Pressurized Water Reactors (PWRs) make use of chemical shim in the form of soluble boron added to the coolant water. While soluble boron allows for even reactivity control and more uniform fuel burn-up, maintaining uniform distribution of the boron is important to prevent localized transients. Transients that are caused by a local disturbance in the concentration of boron are classified as boron dilution transients. While many studies have been performed to study these types of transients, the choice of existing codes available to simulate soluble boron transport have required tradeoffs to be made. Popularly used system codes can only simulate one-dimensional boron transport with comparatively simple physical models, which neglect important physical characteristics of boron transport in the fluid such as mixing due to cross flow between channels and turbulence effects. On the other extreme, Computational Fluid Dynamics (CFD) codes are capable of modeling boron transport with very high fidelity, but most CFD codes still require a large amount of computational resources to simulate a realistic physical model. Recent work at the Pennsylvania State University (PSU) has helped to fill this capability gap. The result is an improvement to the PSU's version of COBRA-TF (PSU CTF) by employing a newly developed boron tracking model. The resulting version of CTF is known as CTF-BTM (CTF-Boron Tracking Model). The implemented boron tracking model uses a Modified Godunov method to solve the boron transport field equation. Although the CTF boron tracking model was rigorously tested at the time it was developed, it has not yet been used in coupled thermal hydraulics and neutronics simulations, which is the aim of this study. The objective of this study is to continue the verification and qualification of the boron tracking model used in CTF-BTM. This is accomplished by first coupling CTF-BTM to the nodal diffusion-based neutronics code NEM. Part II and Part III of the OECD/NRC PWR MOX/UO2 Core Transient Benchmark are then used to validate the coupled code at Hot-Full Power (HFP) conditions and Hot-Zero Power (HZP) conditions using the 2-group homogenized cross section data supplied by the benchmark (generated using 47-group HELIOS 1.7). Close agreement to the benchmark solutions is achieved in both cases. This study culminates in the execution of a postulated post-Small Break Loss Of Coolant Acciden