The effect of corona discharge on free convection heat transfer from a horizontal cylinder

• Published in: Experimental thermal and fluid science 2010-07, Vol.34 (5), p.528-537
• Main Authors: Mahmoudi, Seyed Reza, Adamiak, Kazimierz, Castle, Peter, Ashjaee, Mehdi
• Format: Article
• Language: English
• Subjects: Applied sciences; Computational fluid dynamics; Corona discharge; Coronas; Cylinders; Devices using thermal energy; Electric potential; Energy; Energy. Thermal use of fuels; Exact sciences and technology; Fluid flow; Free convection; Heat exchangers (included heat transformers, condensers, cooling towers); Heat transfer; Horizontal; Interferometry; Ionic wind; Rayleigh number
• ISSN: 0894-1777; 1879-2286
• DOI: 10.1016/j.expthermflusci.2009.11.006

Free convection heat transfer from an isothermal horizontal cylinder in the presence of DC positive corona discharge with a blade edge emitter electrode has been studied experimentally and numerically. A Mach–Zehnder interferometer was used to determine the local Nusselt numbers. The effect of corona discharge on heat transfer from the cylinder was investigated at Rayleigh numbers in the range between 1500 and 5000. To find the details of the flow patterns and to further verify the experimental results, numerical simulations were also performed. It was found that the numerical results are in good agreement with experimental data. By increasing the applied voltage up to 15.5 kV, the corona discharge generates a recirculation zone around the blade and below the lower stagnation point of the cylinder. The effect of the recirculation zone becomes stronger near the breakdown voltage (17 kV) and it is responsible for a local decrease in the cooling of the cylinder around the lower stagnation point. The results indicate that corona discharge has a significant effect on the average Nusselt number at lower Rayleigh numbers whereas it has smaller effect at higher Rayleigh numbers.