Experimental and numerical characterization of a direct solenoid actuation injector for Diesel engine applications

• Published in: Fuel (Guildford) 2014-02, Vol.118, p.316-328
• Main Authors: Postrioti, Lucio, Malaguti, Simone, Bosi, Maurizio, Buitoni, Giacomo, Piccinini, Stefano, Bagli, Giuseppe
• Format: Article
• Language: English
• Subjects: Applied sciences; Computer simulation; Diesel; Diesel direct actuation; Diesel fuels; Energy; Energy. Thermal use of fuels; Engines and turbines; Equipments for energy generation and conversion: thermal, electrical, mechanical energy, etc; Exact sciences and technology; Fuels; In-nozzle flow modeling; Injectors; Nozzles; Primary breakup modeling; Sensitivity analysis; Solenoids; Spray analysis; Tuning
• ISSN: 0016-2361; 1873-7153
• DOI: 10.1016/j.fuel.2013.11.001

•The behavior of a DDI injector was studied by Zeuch method based injection analyzer.•The spray global evolution was studied by imaging; its sizing and velocity by PDA.•Eulerian simulations investigated the fuel distribution within the nozzle.•The simulations reproduce the jets in terms of penetration length and morphology.•The numerical and experimental comparison of the averaged D10 is acceptable. In the present paper, a non-conventional Diesel injection system is analyzed by means of a detailed numerical and experimental investigation. The analyzed system, the Magneti Marelli DDI Diesel direct injection, is based on a direct-actuation solenoid injector. The DDI system operates up to 60.0MPa injection pressure, with a multi-hole nozzle resulting in a conventional fuel spray plumes distribution inside the combustion chamber, which suites the requirements of small industrial and automotive Diesel applications. In the present research activity, the hydraulic behavior of the DDI system was analyzed in terms of injected volumes and injection rate time-histories varying the injection pressure from 30.0MPa to 60.0MPa with a back pressure of 2.0MPa. The resulting injection process was also analyzed in terms of spray global shape evolution along with droplet sizing and velocity in a pressurized (1.0MPa) test vessel in quiescent and room temperature conditions. In order to investigate and to validate the capability of adopted CFD models to reproduce the spray behavior at such non-conventional injection pressure levels for Diesel applications, an experimental and numerical comparison was performed, in terms of liquid spray morphology, tip penetration and droplet sizing. A numerical methodology, based on a preliminary Eulerian Steady Simulation of the nozzle, has been developed in order to gain correct flow rates and turbulence data at each of the nozzle holes exit. Then the Lagrangian spray simulations have been carried out by means of a new atomization approach able to take into account the cavitation phenomena and the turbulence effects. A tuning campaign has been performed in order to validate the secondary KH–RT breakup model, and a grid sensitivity analysis has been carried out.